Choosing 3D printing filament & resin gets tricky when a spool name lists several material terms but the real purchase comes down to finish, material designation, printer context, and spend. The useful shortcut is to decide which of those matters most before comparing colors and listed prices. That prevents a glow or shiny finish from being treated as interchangeable with an ABS+ choice.
Quick take
Start with the finished look and material label, then use listed price as the tie-breaker. A lower price can make a choice easier to shortlist, but it does not establish print quality or performance. The product notes below separate the practical reasons to choose each filament from the limitation that may make another one a closer fit.
Listed-price comparison
The listed prices run from USD 23.74 to USD 27.99, an absolute spread of USD 4.25. The bars show each price position within that range; they are not a performance rating.
| Product | Listed price | Price bar |
|---|---|---|
| Geeetech ABS+ Purple | USD 23.74 | |
| Geeetech Glow Blue Glow PLA | USD 27.99 | |
| Geeetech ABS+ White | USD 23.74 | |
| Geeetech Silk PLA I-silk-white | USD 26.54 |
Decision matrix
- Lowest listed-price route: Geeetech ABS+ Purple and Geeetech ABS+ White, each at USD 23.74.
- Middle listed-price route: Geeetech Silk PLA I-silk-white at USD 26.54.
- Highest listed-price route: Geeetech Glow Blue Glow PLA at USD 27.99.
- Explicit FDM wording: Geeetech ABS+ Purple, Geeetech Glow Blue Glow PLA, and Geeetech ABS+ White are specified for an FDM 3D printer.
Product notes
Geeetech ABS+ Purple 1KG Filament
Choose Geeetech ABS+ Purple 1KG Filament when a purple ABS+ color is the key requirement. The clear reason is the direct pairing of a named color with an ABS+ material designation, making the selection easy to distinguish from the other finishes. Its limitation is equally specific: a project calling for white points toward Geeetech ABS+ White, while a shiny silver appearance points toward Geeetech Silk PLA. The filament diameter is listed as 1.75 mm, a concrete format detail to keep in the comparison. For a color-led brief, that specificity is its practical advantage.
Geeetech Glow Blue 1KG Glow PLA Filament
Geeetech Glow Blue 1KG Glow PLA Filament is the natural match when the Glow PLA designation is central to the project. The named Glow Blue color gives the choice a clear visual direction, while the material label separates it from the ABS+ entries. The limitation is that Glow PLA is not the same material designation as ABS+ Purple or ABS+ White, so it is less direct for a brief centered on ABS+. The 1.75 mm filament diameter is specified, adding a concrete format detail without implying a performance advantage. Choose it for the glow-oriented wording rather than for price alone.
Geeetech ABS+ White 1KG Filament
Geeetech ABS+ White 1KG Filament suits a project that calls for a white ABS+ color. The practical reason to choose it is the direct, easy-to-read combination of the white color phrase and ABS+ material designation. Its limitation is the finish: a purple brief points to Geeetech ABS+ Purple, a glow-oriented brief to Geeetech Glow Blue, and a metallic-like look to Geeetech Silk PLA. That makes it a focused color selection rather than an appearance-led Silk PLA choice. It is a particularly clear match for a straightforward white color brief.
Geeetech Silk PLA Filament 1.75mm for 3D Printer, Metal-Like Shiny Consumable 1k
Geeetech Silk PLA Filament 1.75mm for 3D Printer, Metal-Like Shiny Consumable 1k is aimed at appearance-led projects. Its metal-like shiny wording and smooth shiny silver surface give the finish a more specific direction than a plain color name. The material is Polylactic Acid, and the print guidance is 200-230°C with a 40-60°C bed. That guidance is a limitation for shoppers whose planned workflow does not use those stated settings, while shoppers seeking an ABS+ designation may prefer the purple or white ABS+ choices. The I-silk-white color reinforces the decorative, reflective brief.
Final recommendation by use case
- Purple ABS+ color: Choose Geeetech ABS+ Purple 1KG Filament.
- White ABS+ color: Choose Geeetech ABS+ White 1KG Filament.
- Glow PLA wording: Choose Geeetech Glow Blue 1KG Glow PLA Filament.
- Metal-like shiny surface: Choose Geeetech Silk PLA Filament 1.75mm for 3D Printer, Metal-Like Shiny Consumable 1k.
- FDM wording as the deciding context: Focus on the ABS+ Purple, Glow Blue Glow PLA, or ABS+ White choices.
