Choosing 3D printing filament & resin usually comes down to a practical tradeoff: do you want one clearly named material, a broader menu, a particular color, or the lowest listed price? These four filament choices mention PLA, PETG, ABS, ASA, TPU, and related formats, but each emphasizes a different buying cue. The quickest route is to match the title and package format to the job first, then use price as a tie-breaker-not to assume that a longer material list is automatically a better fit.
Quick take
The four choices separate into straightforward paths. One emphasizes refill and RFID language, one focuses on sealed packaging, another uses High Speed Filament wording, and the fourth names an FDM printer context. The listed prices span a wide range, so the practical split is breadth versus clarity: broad titles cover multiple material names, while color, packaging, refill wording, or printer context can narrow the decision. Begin with the filament type you expect to use, then use the table and matrix to weigh the remaining tradeoffs.
Listed-price comparison
| Product | Listed price | Price bar |
|---|---|---|
| SUNLU PLA/PLA+/PETG/SILK/ABS/ASA/TPU, 1.75mm, 1KG | $64.99 | |
| Creality PLA/PETG/Matte/SILK/ABS/ASA RFID Refill | $17.89 | |
| SUNLU ASA/PLA+/SILK/PETG/ABS/TPU/WOOD High Speed | $19.21 | |
| GEEETECH PLA/ABS+/PETG/TPU/ASA, 1KG | $23.74 |
Decision matrix
- Refill or RFID emphasis: The Creality title explicitly says RFID Refill, and its description discusses RFID auto-recognition and parameter printing for K2/Hi series printers.
- Sealed storage packaging: The SUNLU 1.75mm 1KG choice specifies vacuum packing with a desiccant pack, useful when packaging is part of the buying decision.
- Named color plus high-speed wording: The second SUNLU choice uses Sky Blue and explicitly includes High Speed Filament in its title.
- Printer context and ABS+ color: GEEETECH names For FDM 3D Printer and identifies ABS+ Purple.
Product notes
SUNLU PLA/PLA+/PETG/SILK/ABS/ASA/TPU Filament, 1.75mm, 1KG
The clearest reason to choose this SUNLU entry is its defined 1.75mm, 1KG format, paired with a description that calls out flow, consistent diameter and roundness, layer adhesion, and less stringing and warping. That combination gives a shopper several concrete handling cues to weigh. The limitation is decision clarity: the title names PLA, PLA+, PETG, SILK, ABS, ASA, and TPU together rather than foregrounding one selected material. The listed price is $64.99, the highest in this comparison, so a shopper focused on one filament type may find the broad title harder to justify than a more narrowly worded choice.
Creality PLA/PETG/Matte/SILK/ABS/ASA RFID Refill
Choose the Creality entry when the refill wording or Long Gradient Rainbow color lines up with your workflow. Its description distinguishes CR-PLA, Hyper PLA, and Hyper PLA RFID, and says the RFID version supports auto-recognition and parameter printing for K2/Hi series printers. The concrete limitation is that the title combines several material and finish names, so it does not present one single filament choice as directly as a narrowly named spool. The product identifies 1.75mm diameter, 1.25g/cm3 density, and 12.897% X-Y elongation at break; those numbers describe the item but do not by themselves establish which print use is preferable.
SUNLU ASA/PLA+/SILK/PETG/ABS/TPU/WOOD High Speed Filament
The SUNLU high-speed entry gives a shopper a material-by-material starting point: its description lays out separate temperature and speed ranges for PLA, PLA+, PETG, ABS, PLA Matte, and SILK, while the title also names ASA, TPU, and WOOD. That breadth is a concrete reason to choose it when the print plan may move among named filament types. The limitation is the amount of selection involved. Matching the intended material to its corresponding settings becomes part of the purchase decision, and the title does not narrow the choice to one material. The product identifies 1.75mm filament, adding a defined spool format without resolving which material to select.
GEEETECH PLA/ABS+/PETG/TPU/ASA Filament, 1KG
GEEETECH gives a clear package choice: the title names a 1KG filament and lists PLA, ABS+, PETG, TPU, and ASA. That combination is a concrete reason to choose it when a 1KG spool and the material wording fit the project. The limitation is the broad material list, which leaves the shopper to select among several named types rather than following a single-material title. A 3-month manufacturer warranty is also listed; it is a specific purchase term, but it does not resolve the material choice. The ABS+ wording provides a defined direction, while the wider title keeps the purchase open to several filament categories.
Final recommendation by use case
- Lowest listed price: Choose the Creality PLA/PETG/Matte/SILK/ABS/ASA RFID Refill at $17.89 when price leads the decision.
- Sealed storage: Choose the SUNLU PLA/PLA+/PETG/SILK/ABS/ASA/TPU filament with vacuum packing and a desiccant pack.
- Color-led selection: Choose the SUNLU ASA/PLA+/SILK/PETG/ABS/TPU/WOOD High Speed Filament in Sky Blue.
- FDM context: Choose the GEEETECH PLA/ABS+/PETG/TPU/ASA filament when the For FDM 3D Printer wording is the clearest fit.
For a single-material plan, favor the heading that names your intended material most clearly. For a broader print queue, compare the material menu with the specific color, packaging, or printer-context cue before choosing.
