Choosing supplies for resin 3D printers is less about picking a generic bottle and more about matching the cleanup routine, color, and printer language to your project. Anycubic Water Washable Resin 2.0 and Roxel3D ColorSpace Red Resin take different routes: one centers on water cleanup and grey prints, while the other centers on red resin labeled for 405nm MSLA/LCD/DLP 4k and open printers. Here is the practical split.
Quick verdict
Pick Anycubic Water Washable Resin 2.0 if direct water cleaning and grey color are the main priorities. Choose Roxel3D ColorSpace Red Resin if red is the deciding color and the 405nm MSLA/LCD/DLP 4k + OPEN PRINTERS wording matches your setup. The printer language and handling routine are the most useful tie-breakers, while the listed prices create a clear $14.41 spread.
At a glance
| Comparison point | Anycubic Water Washable Resin 2.0 | Roxel3D Red Resin |
|---|---|---|
| Listed price | USD 21.59 | USD 36.00 |
| Color | Grey | Red |
| Printer wording | For DPL LCD SLA 3D Printers | 405nm MSLA/LCD/DLP 4k + OPEN PRINTERS |
| Cleanup wording | Directly cleaned with water instead of alcohol | Easy to clean |
Where each resin wins
Anycubic wins for a water-based cleanup routine
Anycubic is the clearer match when avoiding alcohol in the cleanup step is important. Its water-washable design is paired with low-shrinkage wording and a formula intended to help prevent cracking during photo curing. The Grey color is also a straightforward choice for projects where a neutral tone is wanted. Its printer wording specifically names DPL LCD SLA 3D Printers, giving you a concrete compatibility phrase to compare with your machine.
Roxel3D wins for red color and explicit printer terminology
Roxel3D makes more sense when the project calls for Red resin. Its title explicitly names 405nm MSLA/LCD/DLP 4k and open printers, while the product is positioned as a general-use resin. The ColorSpace description also says its resins use the same print settings across colors, which may appeal to shoppers who want consistency within that line. The trade-off is a higher listed price and a shorter listed warranty than Anycubic.
Product notes
Anycubic Water Washable Resin 2.0
The clearest reason to choose this grey resin is its cleanup approach: it can be cleaned directly with water instead of alcohol. That makes the handling routine the central differentiator, especially for shoppers who specifically want a water-washable formulation. It also offers low shrinkage during photo curing, high precision, a smooth surface, and a formula intended to prevent models from cracking. The limitation is procedural rather than performance-based: the resin needs a full shake before use so its functional components and color paste mix; skipping that step may cause uneven coloring. Its printer wording is specifically For DPL LCD SLA 3D Printers, so that is the phrase to match against your setup. The listed manufacturer warranty is 1.5 years.
Roxel3D ColorSpace Red Resin
Roxel3D is the more direct pick when choosing a red resin matters: its color is Red, and it is presented as a strong primary red for general use. Its printer wording spells out 405nm MSLA/LCD/DLP 4k + OPEN PRINTERS, giving shoppers a clear set of terms to compare with their machine. It also carries low-shrink and easy-to-clean wording, plus a statement that ColorSpace resins use the same print settings across colors. One consideration is the listed California Prop 65 warning, and its manufacturer warranty is 3 months. Those are concrete factors alongside the red color and printer-language match, not reasons to assume how a finished print will turn out.
Final choice by use case
- For water-based cleanup: Choose Anycubic Water Washable Resin 2.0 because it explicitly supports direct water cleaning and comes in Grey.
- For a red resin: Choose Roxel3D ColorSpace Red Resin, whose title and attributes specify Red.
- For printer-language matching: Compare your machine with Anycubic's DPL LCD SLA wording or Roxel3D's 405nm MSLA/LCD/DLP 4k + OPEN PRINTERS wording.
- For a lower listed price: Anycubic is the pick at USD 21.59 versus Roxel3D at USD 36.00, a $14.41 spread.
- Overall: Choose the resin whose cleanup method or color solves your project first. Anycubic is the more direct match for a water-centered routine, while Roxel3D fits a red-resin brief with explicit printer terminology.
