When shopping for hardware consumables, the main decision is whether you need a system-specific laboratory parts lot, a numbered replacement kit, or tooling for tapping work. These four choices cover distinctly different jobs, while listed prices run from USD 79.99 to USD 699.99. Match the named system or machine application first; the lowest-priced option is not automatically the right fit for an interface-maintenance task or a tapping setup.
Quick take
- Choose the Shimadzu 228-43969-91 Hardware CONSUMABLES Kit 460-08782 REV.E when the exact kit number and REV.E designation are central to your selection.
- The LOT OF Agilent GC-MS Interface Parts Lot - Tees, Ferrules, Nuts, Clamps & Screws is the focused choice for GC-MS interface hardware such as tees, ferrules, tubing nuts, clamps, and screws.
- Pick the Fast Change Tapping Chuck Set Drill Tap Tool Holder Hardware Consumables for drilling-machine tapping across the stated M3 through M12 range.
- The THERMO FISCHER UHPLC SYSTEM VANQUISH CONSUMABLES HARDWARE ASSORTED LOT is aimed at shoppers seeking an assorted Vanquish lot rather than individually named fittings.
Listed-price comparison
| Hardware consumables option | Listed price | Price position |
|---|---|---|
| Shimadzu 228-43969-91 Hardware CONSUMABLES Kit 460-08782 REV.E | USD 79.99 | |
| Fast Change Tapping Chuck Set Drill Tap Tool Holder Hardware Consumables | USD 86.28 | |
| LOT OF Agilent GC-MS Interface Parts Lot - Tees, Ferrules, Nuts, Clamps & Screws | USD 89.99 | |
| THERMO FISCHER UHPLC SYSTEM VANQUISH CONSUMABLES HARDWARE ASSORTED LOT | USD 699.99 |
Decision matrix
- Exact Shimadzu kit identification: The Shimadzu option carries the 228-43969-91 number and 460-08782 REV.E reference.
- Agilent/HP GC-MS interface maintenance: Select the Agilent lot for its stated 597x MSD and 6890/5890 GC uses, including column installation, vent tubes, and splitters.
- Drilling-machine tapping: The fast-change chuck set is the dedicated tool-oriented option, with a connecting handle and stated M3, M4, M5, M6, M8, M10, and M12 clamping range.
- Vanquish assortment: The Thermo Fisher lot is the fit when an assorted UHPLC System Vanquish consumables hardware grouping is the goal.
Product notes
THERMO FISCHER UHPLC SYSTEM VANQUISH CONSUMABLES HARDWARE ASSORTED LOT
Choose this Thermo Fisher option when your need is centered on a UHPLC System Vanquish consumables hardware assortment. The lot is described as including everything pictured, which suits a purchase built around the pictured grouping instead of one small replacement piece. Listed by JW-iCuzATA at USD 699.99, it occupies a very different price tier from the other three selections. The limitation is equally clear: it is the highest-priced choice here, and its presentation is as an assorted Vanquish lot rather than a set of individually named tees, ferrules, nuts, or tap chucks. It makes the most sense for a shopper already seeking this system-specific assortment.
Shimadzu 228-43969-91 Hardware CONSUMABLES Kit 460-08782 REV.E
The Shimadzu kit is the straightforward pick for shoppers working from the 228-43969-91 identifier and 460-08782 REV.E reference. Its named kit format provides a more specific starting point than a broad assorted lot, and it is listed by JW-iCuzATA at USD 79.99. The item is also identified as a Shimadzu hardware consumables kit with Japan listed as its country of origin. Its limitation is scope: the title stays focused on that numbered kit, not on the GC-MS interface fittings named in the Agilent lot or on the tap sizes and drilling-machine use stated for the fast-change chuck set.
Fast Change Tapping Chuck Set Drill Tap Tool Holder Hardware Consumables
For tapping work on a drilling machine, this fast-change set is the purpose-built alternative in the group. The stated clamping range covers M3, M4, M5, M6, M8, M10, and M12, while the description calls out a connecting handle body that works with multiple tap sockets. It is listed at USD 86.28 and specifies 0.02 mm clamping accuracy. That makes it a logical choice when changing among the stated tap sizes is the core task. Its limitation is application focus: this is a drill tap tool holder set for tapping work, rather than a laboratory hardware lot for UHPLC or GC-MS interface maintenance.
LOT OF Agilent GC-MS Interface Parts Lot - Tees, Ferrules, Nuts, Clamps & Screws
This Agilent lot is the targeted choice for GC-MS interface work because its title and contents call out tees, ferrules, nuts, clamps, and screws. The package includes four 1/16-inch SST M-F tees, three front ferrules, three back ferrules, three 1/8-inch tubing nuts, a vent tube clamp, M4 x 6 mm screws, and additional fittings and hardware shown. At USD 89.99, it sits close to the Shimadzu kit and tapping chuck set in listed price. The trade-off is that it is a parts lot oriented around stated GC-MS installation, splitter, vent-tube, and interface-maintenance uses rather than a numbered Shimadzu kit or a fast-change tapping setup.
Final recommendation by use case
Start with the Shimadzu 228-43969-91 Hardware CONSUMABLES Kit 460-08782 REV.E when the part and revision references match your requirement. Choose the Agilent GC-MS Interface Parts Lot for a named collection of interface fittings and hardware. For drilling-machine tapping across the stated metric sizes, go with the Fast Change Tapping Chuck Set. Reserve the THERMO FISCHER UHPLC SYSTEM VANQUISH CONSUMABLES HARDWARE ASSORTED LOT for a purchase specifically centered on an assorted Vanquish grouping.
