When you need hardware consumables, the first question is whether you are replenishing torch parts or organizing materials. The four options here take different approaches: a five-tier filament storage rack, two TIG torch consumables kits, and a Shimadzu consumables kit. Their listed prices vary considerably, so the right pick depends on your specific fixture and the amount of spares you want.
Quick Take
For a low-cost way to keep a TIG torch ready, the 12-piece kit gives you the essential cups, collet, and sealing rings. The 23-piece kit adds more parts, including glass cups and brass fittings. The Fivechinus filament rack is not a torch consumable, but it solves the storage side of a workshop. The Shimadzu kit is a branded consumables set for someone who recognizes the part number.
Listed Price Comparison
| Product | Listed Price | Price Bar | Key Point |
|---|---|---|---|
| 3D Printer Filament Storage Rack with Wheels, 5-Tier Metal 2 Rows | USD 71.99 | Fivechinus rack with wheels for filament spools; 5 tiers, 2 rows | |
| 12 Pieces TIG Metal Joining Torch Consumables Kit | USD 22.96 | 12-piece kit for WP-17/18/26 torches | |
| 23 Pieces TIG Torch Accessory Kit | USD 47.89 | 23-piece kit with glass cups and brass fittings | |
| Shimadzu 228-43969-91 Hardware CONSUMABLES Kit | USD 79.99 | Shimadzu consumables part |
Decision at a Glance
- Basic TIG torch replacements: 12-piece kit
- Wider TIG consumable selection: 23-piece kit
- Filament storage in a workshop or garage: Fivechinus rack
- Branded Shimadzu consumables for lab or analytical equipment: Shimadzu kit
Product Notes
3D Printer Filament Storage Rack with Wheels, 5-Tier Metal 2 Rows
This storage rack solves a workspace problem that TIG consumables do not: keeping filament spools organized. The Fivechinus rack is a 5-tier, 2-row metal cart with wheels, built for PLA, TPU, ABS, ASA, and nylon. The description mentions a thickened steel frame and a per-shelf capacity of 100 pounds, and it includes mounting hardware and assembly instructions. At $71.99, it is the second most expensive item here, so it is a better fit if filament organization matters more than part replacement. The limitation is that it does not help with a TIG torch; if you are looking for cups, collets, or sealing rings, the kits below are more direct.
12 Pieces TIG Metal Joining Torch Consumables Kit
The 12-piece kit is the lowest-priced option in this comparison at $22.96. It is described as a direct replacement for WP-17, WP-18, and WP-26 torches, and it includes lavender ceramic cups in sizes 4, 5, and 6, a copper collet body with a red shielding cap, a clear cup, a black torch cap, a white insulating gasket, and four green sealing rings. That is a complete set of the most common wear parts for a TIG torch. The limitation is the part count: 12 pieces means fewer cups and fittings than the 23-piece kit. For someone who only needs to refresh the basic consumables on one torch, this kit offers a low-cost, low-complexity choice.
23 Pieces TIG Torch Accessory Kit
At $47.89, this 23-piece kit sits between the entry-level 12-piece kit and the more expensive storage rack. It also targets WP-17, WP-18, and WP-26 torches, but the part list is broader: clear cylindrical glass cups, brass threaded fittings with red shield sleeves, black torch components, copper-colored tubes, green sealing rings, and white insulating rings. The transparent glass cups are a notable detail because they make the weld area easier to see during use. The limitation is the price, which is nearly twice the 12-piece kit. If you want a wider selection of sizes and fittings in one box, this kit gives you that, but if you use just one torch setup, the smaller kit may be enough.
Shimadzu 228-43969-91 Hardware CONSUMABLES Kit
This is a branded Shimadzu option, sold by merchant JW-iCuzATA for $79.99. The Shimadzu part number is clearly identified, and the description says the unit pictured is the actual item you will receive. It also cautions that units may show signs of wear, blemishes, scratches, or discoloration, so it is best for someone who knows the part number and does not expect a pristine cosmetic condition. The strongest reason to choose it is the Shimadzu identification and the Japan country of origin. The limitation is the $79.99 price, the highest in this comparison, along with the described wear condition. If you only need TIG torch consumables, the 12-piece or 23-piece kits give you a more explicit parts list for less money.
Final Recommendation by Use Case
If you want the lowest-priced way to replace TIG torch wear parts, go with the 12-piece kit. If you prefer a broader assortment and are willing to pay more, the 23-piece kit is the balanced choice. If your main need is filament storage in a garage or workshop, the Fivechinus 5-tier rack is the organizing solution. And if you specifically need a Shimadzu-branded consumables kit for lab or analytical hardware, the Shimadzu option from JW-iCuzATA is the choice for that part number.
