Shopping for resin 3d printers can put two very different needs side by side: one shopper may need print material, while another needs equipment to clean and cure completed parts. The useful question is what your next task is, because resin and a wash-and-cure unit solve different problems. Match the purchase to your printer workflow and post-print routine rather than treating these as interchangeable products.
Quick verdict
Choose ROXEL3D when you need 1KG yellow STANDARD resin for open 405nm MSLA/LCD/DLP 4K+ printers. Choose ANYCUBIC when the missing step is wash-and-cure equipment for LCD resin printing. The $143 difference reflects two different jobs: one supplies resin, while the other handles post-print processing.
At a glance
| Product | Listed price | Primary role | Concrete detail |
|---|---|---|---|
| ROXEL3D 1KG Resin | $36.00 | Standard resin | Yellow; open 405nm MSLA/LCD/DLP 4K+ use |
| ANYCUBIC Wash and Cure 3 Plus | $179.00 | Post-print equipment | LCD resin workflow; Wash&Cure 3 Plus model |
Where each product wins
- ROXEL3D wins for direct material needs. Its $36.00 price is the lower listed price in this pair, and its general-use, low-shrink, easy-to-clean description is aimed at routine resin printing.
- ANYCUBIC wins for the finishing-equipment need. The $143 difference is attached to a dedicated Wash and Cure 3 Plus unit, with a stated fit for Photon Mono M5s, Saturn 3 series, or other LCD printers at 10.6 inches and below.
Product notes
ROXEL3D 1KG Resin
ROXEL3D is the focused choice when the immediate need is new print material in a specific color. Its ColorSpace Yellow Resin is described as general-use, with low shrink and easy cleaning-concrete workflow details for routine printing. The ColorSpace range also uses the same print settings across its resins, which can be useful if you already work within that line. The factors to weigh are equally concrete: this is STANDARD material, the color is yellow, and the California Prop 65 warning deserves attention. The manufacturer warranty is 3 months. Choose it for the resin-specific job; its title does not indicate equipment for washing or curing finished parts.
ANYCUBIC Wash and Cure 3 Plus
ANYCUBIC serves a different need: a dedicated purchase for cleaning and curing prints in an LCD resin workflow. The model is identified as Wash&Cure 3 Plus, and its stated fit includes Photon Mono M5s, Saturn 3 series, and other LCD printers at 10.6 inches and below. That named range gives it a concrete use case when your printer falls within that description. A 1-year manufacturer warranty is another reason to choose it for a dedicated post-print station. The limitation is scope: it does not provide printing resin, so buying it will not replenish the material represented by the ROXEL3D item. Its $179.00 price also makes it the higher-cost purchase in this pair.
Final choice by use case
For a material purchase, choose the ROXEL3D 1KG Resin. For a wash-and-cure purchase, choose the ANYCUBIC Wash and Cure 3 Plus. If both needs are on your list, treat them as separate stages rather than substitutes: the correct choice depends on whether printing material or post-print handling is next.
