DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

3 4 Drive Socket Set Buying Guide

A 3/8-inch drive socket set is the mid-range workhorse of hand tool kits, balancing leverage and access for tasks from engine repair to furniture assembly. The key trade-off is between 6-point vs 12-point sockets, chrome vanadium (Cr-V) vs chrome molybdenum (Cr-Mo) steel, and hand-tool vs impact-rated construction. Buy a Cr-V 6-point set for general hand use; step up to Cr-Mo impact sockets only if you use a powered impact wrench.

Drive Size:3/8" (mid-range)Socket Points:6-point vs 12-pointSteel Grade:Cr-V (hand) vs Cr-Mo (impact)Size Range:SAE 5/16"-3/4" / Metric 8-19mm
Typical price range$4.89 – $210.99

At a glance

Category
Hand Tools
Data updated
Nov 20, 2026

Current offers

Highlights

  • Drive size 3/8" handles 10-24mm fasteners; 1/4" is for small fasteners, 1/2" for high-torque lugs.
  • 6-point sockets grip flat sides and resist rounding; 12-point sockets offer 30-degree indexing but round soft bolts.
  • Cr-V steel suits hand ratchets; Cr-Mo steel is mandatory for impact wrench use to resist shattering.
  • Deep sockets clear long studs; standard sockets are shorter for tight recesses—sets mixing both cover more jobs.

Best use cases

  • Automotive repair: pick a 3/8" drive set with 6-point SAE and metric sockets from 5/16"-3/4" and 8-19mm; skip 12-point for rusty bolts.
  • Impact wrench use: choose a Cr-Mo impact-rated set with 6-point sockets; never use Cr-V hand sockets on an impact gun.
  • General household/DIY: a 3/8" set with 8-22mm and 5/16"-3/4" covers furniture, appliances, and bike repair; skip 1/2" drive unless working on suspension.
  • Tight-access work: add a 3/8" flex extension bar and universal joint; skip deep sockets if clearance is under 1 inch.

Buying tips

  • Match socket size range to your fasteners: 3/8" drive typically covers 5/16"-3/4" SAE and 8-19mm metric; confirm both scales in the set.
  • Check point count: 6-point for rounded-bolt resistance; 12-point only for confined swing arcs where indexing matters.
  • Verify steel grade: Cr-V for hand tools; Cr-Mo and black oxide finish for impact-rated sockets.
  • Count pieces carefully: a 48-piece set usually means sockets + accessories; a 20-piece set may lack deep sockets or extensions.

Specs

Drive Size3/8" (mid-range)
Socket Points6-point vs 12-point
Steel GradeCr-V (hand) vs Cr-Mo (impact)
Size RangeSAE 5/16"-3/4" / Metric 8-19mm

Related searches

What to check before buying

  • Measure bolt sizes on your equipment: if most are 10-19mm, a 3/8" drive metric set covers them; add 1/2" for lug nuts.
  • Confirm your ratchet or impact wrench accepts 3/8" drive anvil; adapters reduce torque and add slop.
  • Check storage: a blow-molded case with labeled sizes speeds selection and prevents missing sockets.
  • For impact use, verify your compressor or cordless wrench delivers enough torque; impact sockets are heavier and need clearance.

FAQ

All Hand Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.