DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

3 8 Impact Socket Set Buying Guide

A 3/8-inch drive impact socket set is the mid-size workhorse for automotive and light-industrial fastening, sized between 1/4-inch precision work and 1/2-inch heavy-breaking duty. The defining trade-off is steel grade versus wall thickness: true impact-rated Cr-Mo (chrome-molybdenum) sockets absorb hammer torque and run thinner walls, while Cr-V (chrome-vanadium) sets are cheaper and fine for hand use but can shatter under repeated impact. Buy Cr-Mo, 6-point, with stamped size markings if the set will see an impact wrench; buy a Cr-V hand-tool set only for ratchet and breaker-bar work.

Drive Size:3/8-inch square driveSteel Grade:Cr-Mo (impact) vs Cr-V (hand)Point Count:6-point vs 12-pointSocket Depth:Standard / Deep / Combined
Typical price range$39.89 – $113.97

At a glance

Category
Hand Tools
Data updated
Nov 20, 2026

Current offers

Highlights

  • Impact-rated sockets use Cr-Mo steel for toughness and ductility; Cr-V is harder and more brittle and is intended for hand tools, not sustained impact wrench use.
  • 6-point hex broaching contacts the fastener on flats, resisting corner rounding better than 12-point, which is reserved for tight-access hand work.
  • True impact sockets are phosphate or black-oxide finished with thicker drive-end walls and a retaining ring/hole to lock onto the anvil.
  • Deep and standard (shallow) sockets are distinct: deep sockets reach recessed nuts and studs; standard sockets keep the shortest length for clearance.

Best use cases

  • Best fit: a 3/8-inch Cr-Mo 6-point set (SAE 5/16-3/4 in, metric 8-19 mm) for lug nuts, brake calipers, and engine bay work with a 3/8 impact wrench or ratchet.
  • Best fit: a deep + standard combined set if you service struts, suspension, and recessed fasteners; skip shallow-only sets for that job.
  • Wrong fit: a Cr-V set marketed as impact for daily air/electric impact use on seized hardware—reserve Cr-V for hand ratchet/breaker-bar duty only.
  • Skip 12-point impact sockets for general repair; choose 6-point for maximum fastener life unless you specifically need 12-point for tight angles.

Buying tips

  • Match drive size: 3/8-inch drive covers roughly 5/16-3/4 in and 8-22 mm; step to 1/2-inch drive for fasteners above 3/4 in / 19 mm.
  • Buy Cr-Mo for impact use; confirm the socket wall is heavy-duty and the drive end has a pin/ring retention hole.
  • Prefer sets with laser-etched and stamped size markings—etched-only markings wear off in oily shop use.
  • Choose 6-point for impact duty; 12-point only if you need off-angle hand access on 12-point fasteners.

Specs

Drive Size3/8-inch square drive
Steel GradeCr-Mo (impact) vs Cr-V (hand)
Point Count6-point vs 12-point
Socket DepthStandard / Deep / Combined

Related searches

What to check before buying

  • Measure your impact wrench anvil: 3/8-inch square drive—do not buy 1/2-inch adapters unless you accept torque loss.
  • Verify fastener range needed: SAE 5/16-3/4 in and metric 8-19 mm cover most passenger-car work; add 21-22 mm for lug nuts.
  • Confirm clearance: deep sockets add length; check strut and recess depth before buying a deep-only set.
  • Check case footprint and retention: a blow-molded case with labeled slots keeps sizes organized and prevents missing sockets.

FAQ

All Hand Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.