Photos from current listings. Actual item, color, and included accessories may vary.
Drill Bit Set Buying Guide
A drill bit set is a collection of cutting tools for boring holes in wood, metal, masonry, or plastic, plus often driver bits for fasteners. The core trade-off is metallurgy and geometry versus piece count: high-speed steel (HSS) or cobalt bits hold an edge and resist heat, while cheap carbon-steel or mystery-steel bits dull fast and snap under load. The decision rule is simple: match bit material and tip geometry to your hardest regular material, and buy a focused set with clearly labeled steel grades over a bloated no-name assortment.
At a glance
- Category
- Hand Tools
- Data updated
- Nov 20, 2026
Current offers
33PCS Screwdriver Bit Set Hex Head Drill Bit Set with 1/4" Extension Bit Holder$5.00View on eBay
Drill Bit Set 318PCS Screwdriver Bit Set With Carrying Case Multi-purpose$47.99
View on Mallflare
Fixion Tools Drill Bits Magnetic Phillips Screwdriver Drill Bit Set Anti Slip Bi$9.23View on eBay
Drill Bit Set 246PCS Screwdriver Bit Set With Carrying Case Multi-purpose$56.99
View on Mallflare
WORKPRO 20pcs Hex Head Allen Wrench Drill Bit Set Metric and SAE Hex Bits New$19.99View on eBay
Pop Rivet Gun Kit, With 200 Blind Rivets, Heavy Duty Single Hand Riveter 4 Interchangeable Nosepieces, 4 Drill Bits, And A Carrying Case, Manual Riveting Tool For Metal, Automotive, Home$29.99
View on Mallflare
33PCS Hex Head Drill Torx Bit Set Tamper Security 1/4" Extension Screwdriver Kit$4.00View on eBay
Pop Rivet Gun Kit, With 230 Blind Rivets, Two-Handed Riveter 5 Interchangeable Nosepieces, 5 Drill Bits, And A Carrying Case, Manual Riveting Tool For Metal, Automotive, Home, And DIY$33.99
View on Mallflare
33 PCS Tamper Security Torx Bit Set Hex Head Drill Extension Screwdriver Bits US$4.00View on eBay
Helicoil Thread Repair Kit, 166-Piece Metric HSS Drill Kit, M5 M6 M8 M10 M12 Heli Coil Rethreading Tool Kit With HSS Bits Inserts Taps Breakoff Installation Tools$36.99
View on Mallflare
37 Piece Impact Screwdriver Bit Set Nut Driver Torx Phillips Tool Magnetic Drill$12.89View on eBay
Rivet Nut Tool Kit, 9-Inch One-Handed Rivnut Kit, With 8 Mandrels, A Step Drill Bit And 80 Nuts, Metric And SAE Size M3, M4, M5, M6, 6-32, 8-32, 10-24, 1/4-20 UNC, A Carrying Case$38.99
View on Mallflare
208pcs Impact Screwdriver Bit Set Nut Driver Torx Phillips Tool Magnetic Drill$29.99View on eBay
Screw Extractor Set With Drill Bits, 49 Pieces, Easy Out Nut Bolt Extractors And Adapters, Solid Storage Case, Cr-Mo Steel For Removing Rounded, Broken, Or Stripped Fasteners$39.99
View on Mallflare
Security Torx Bit Set +Hex Key Allen Bit Set-For Power Drill & Impact Driver Lot$887.00Last checked Nov 16, 2026View on eBay
Screw Extractor Set With Drill Bits, 41 Pieces, Easy Out Bolt Extractors And Adapters, Solid Storage Case, Cr-Mo Steel For Removing Rounded, Broken, Or Stripped Bolts, Screws$57.99
View on Mallflare
Helicoil Thread Repair Kit, 338-Piece SAE And Metric Rethreading Tool Kit, M5, M6, M8, M10, M12, 1/4", 5/16", 3/8", 7/16", 1/2", HSS Drill Bits Inserts Taps Breakoff Installation Tools$74.99
View on Mallflare
Screw Extractor Set With Drill Bits, 54 Pieces, Easy Out Nut Bolt Extractors And Adapters, Solid Storage Case, Cr-Mo Steel For Removing Rounded, Broken, Or Stripped Fasteners$76.99
View on Mallflare
Screw Extractor Set With Drill Bits, 65 Pieces, Easy Out Nut Bolt Extractors And Adapters, Solid Storage Case, Cr-Mo Steel For Removing Rounded, Broken, Or Stripped Fasteners$92.99
View on Mallflare
Screw Extractor Set, 63 Pieces, With Nut And Bolt Extractors, Nut Splitters, Taps, Drill Bits, Wrenches, Adapters, And Solid Storage Case, For Removing Rounded, Broken, Or Stripped Fasteners$100.99
View on Mallflare
Highlights
- HSS with black oxide or titanium coating is the baseline for metal and wood; cobalt (M35) or solid carbide is required for stainless steel and hardened alloys.
- Masonry bits use carbide tips with a distinct flute geometry and must never be used in a standard rotary drill—they need hammer mode.
- Brad-point and brad-point pilot tips prevent wandering in wood; split-point 135° tips self-center on metal and reduce walking.
- Bit shank standards matter: 1/4-inch hex fits impact drivers, 3/8-inch and 1/2-inch reduced shanks fit drill chucks, and round shanks above 3/8-inch require a chuck that closes to that size.
Best use cases
- Best fit: a 1/4-inch hex shank set (often 20–40 pieces) for impact-driver users doing furniture assembly, cabinet hardware, and light metal—skip round-shank HSS sets if you never use a drill chuck.
- Best fit: a 29-piece fractional HSS set (1/16 to 1/2 inch) for general home and shop drilling in wood and mild steel—skip giant 200-piece kits unless you regularly need masonry, extractors, and specialty bits.
- Best fit: a dedicated carbide-tipped masonry set for concrete, brick, and block—never substitute wood or HSS bits in hammer mode, as they will overheat and shatter.
- Wrong fit: a screwdriver-bit-only set for drilling holes; 1/4-inch hex driver bits are for fasteners, not boring, and will snap if used as drill bits.
Buying tips
- Buy HSS bits labeled with a known grade (M2, M35 cobalt) rather than 'high-carbon steel'; carbon steel is for softwood only and dulls quickly.
- For impact drivers, choose 1/4-inch hex shank bits; for drill chucks, choose round shank. A set that mixes both is useful, but verify each bit's shank type.
- Size coverage beats piece count: a set spanning 1/16–1/2 inch in 1/64 increments covers nearly all household fasteners and pilot holes.
- Cobalt bits cost more but last far longer in stainless and hardened steel; reserve them for metalwork and keep a separate HSS set for wood to avoid cross-contamination.
Specs
| Bit Material | HSS / Cobalt / Carbide-tipped |
|---|---|
| Shank Type | 1/4-in hex / Round / Reduced |
| Size Range | 1/16–1/2 in fractional |
| Tip Geometry | 135° split / Brad-point / Masonry |
Related searches
What to check before buying
- Measure your drill chuck's minimum capacity: most 3/8-inch chucks cannot grip bits under 1/16 inch, so micro-bit sets need a 1/4-inch hex adapter or a keyless chuck with a smaller minimum.
- Confirm your drill's mode: masonry bits require a hammer drill; using them in a standard rotary drill will burn out the bit and the tool.
- Check your driver: impact drivers accept 1/4-inch hex shanks only, while standard drills accept round shanks—buy the set matching your primary tool.
- Verify bit length for your application: stubby bits fit tight spaces, but long bits flex; for deep holes, choose bits at least 1 inch longer than the hole depth.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.