Hacksaw Buying Guide
A hacksaw is a hand-powered saw for cutting metal, plastic, and other hard materials, defined by its frame depth and blade tooth pitch. The core trade-off is frame rigidity versus adjustability: fixed frames are stiffer for straight cuts, while adjustable frames accept different blade lengths and tension. Choose a high-tension frame with a 24-TPI bi-metal blade for general metalwork; skip low-tension frames with carbon-steel blades for anything harder than plastic.
At a glance
- Price range
- Price range not synced yet
- Category
- Hand Tools
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Blade length standard is 10 or 12 inches (250–300 mm); 12-inch frames give longer strokes and are the default for general metal cutting.
- Tooth pitch matters: 18 TPI for thick stock and pipe, 24 TPI for general metal and conduit, 32 TPI for thin sheet and tubing under 1/16 inch.
- Bi-metal (HSS edge welded to flexible back) blades resist shock and last far longer than carbon-steel blades, which snap under lateral load.
- Frame tension: 200–300 lb of blade tension is ideal; lever-action or screw tensioners that flex the frame less produce straighter cuts and fewer blade breaks.
Best use cases
- Buy a 12-inch fixed-frame hacksaw with 24-TPI bi-metal blade for general shop metal cutting, conduit, and threaded rod; skip adjustable frames if you only cut one material.
- Choose a close-quarter or mini hacksaw (6–8 inch blade) for PVC, copper pipe in tight spaces, and overhead work; skip full-size frames where swing clearance is limited.
- Pick an adjustable frame (10–12 inch) if you regularly switch between wood, plastic, and metal blades; skip it if you need maximum rigidity for precise straight cuts in steel.
- For high-volume metal cutting, select a frame with a thick (1-inch+) tubular or I-beam profile and a lever tensioner; skip stamped-sheet frames that flex under load.
Buying tips
- Match TPI to material thickness: use 18 TPI for stock over 1/4 inch, 24 TPI for 1/16–1/4 inch, and 32 TPI for sheet under 1/16 inch to avoid snagging.
- Choose bi-metal blades (HSS teeth, flexible back) over carbon steel for any metal cutting; carbon steel is acceptable only for plastic and soft wood.
- Check frame depth: a 12-inch frame typically provides 4–5 inches of throat depth; deeper frames (6+ inches) are needed for cutting wide profiles.
- Prefer frames with a comfortable, nonslip grip and a blade-change mechanism that doesn't require tools; tool-free tension levers speed blade swaps.
Specs
| Blade Length | 10 in / 12 in (250–300 mm) |
|---|---|
| Tooth Pitch | 18 / 24 / 32 TPI |
| Blade Material | Bi-metal (HSS) vs carbon steel |
| Frame Type | Fixed vs adjustable tension |
Related searches
What to check before buying
- Measure the largest cross-section you'll cut: frame throat depth must exceed the stock width plus blade kerf for a full stroke.
- Confirm blade compatibility: most frames accept standard 10 or 12 inch blades with pinned or unpinned ends; verify your frame's pin type before buying blades.
- Check handle clearance: if cutting near a wall or floor, a front-handle or low-profile frame may be needed to avoid knuckle strike.
- Store blades separately by TPI; a blade that's too coarse for thin stock will snag and break, so keep a range (18, 24, 32 TPI) on hand.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
