Faro Measuring Arm Buying Guide
A Faro measuring arm is a portable coordinate measuring machine (PCMM) that uses a multi-axis articulated arm with a hard probe or laser scanner to capture 3D points for inspection, reverse engineering, and alignment. The primary trade-off is between contact-probe accuracy and the larger volumetric accuracy needed for non-contact laser scanning, plus the arm's reach versus shop-floor portability. The clear decision rule: choose a probe-only arm for metrology-grade dimensional inspection within a defined working envelope, and step up to a laser-scanner-equipped arm only when you need dense point clouds across larger parts.
At a glance
- Price range
- Price range not synced yet
- Category
- Measuring & Layout Tools
- Data updated
- Nov 21, 2026
Current offers
Highlights
- FaroArm 6-axis models use rotary encoders with repeatability to ±0.025 mm and volumetric accuracy from ±0.024 mm to ±0.085 mm depending on reach class (1.2 m to 4.0 m).
- Laser Line Probe (LLP) attachments add non-contact scanning at up to 100,000 points/sec but reduce system accuracy to roughly ±0.060 mm to ±0.100 mm due to optical standoff.
- The Quantum series (M/Max/S) uses carbon-fiber tube construction and Bluetooth/wireless operation, while legacy Platinum and Fusion arms use aluminum tubes and wired USB/ethernet connections.
- Absolute encoders eliminate re-homing after power loss; incremental-encoder arms require a warm-up and reference-point routine before every measurement session.
Best use cases
- Best fit: in-process inspection of machined parts up to 3 m diagonal — pick a 2.4 m or 3.0 m 6-axis probe arm with absolute encoders; skip laser scanning if you only need GD&T pass/fail.
- Best fit: reverse engineering and CAD-to-part comparison of large assemblies — choose a 3.5 m or 4.0 m arm with LLP laser scanner and PolyWorks or Geomagic software; skip short 1.2 m arms that force repositioning.
- Wrong fit: high-volume automated production gauging — a FaroArm is manual and operator-dependent; use a fixed CMM or inline vision system instead.
- Wrong fit: hobbyist or occasional woodworking layout — a laser distance meter or digital angle finder delivers the needed accuracy at a fraction of the cost and complexity.
Buying tips
- Size the arm to part diagonal, not part length: a 2.4 m arm covers roughly a 1.9 m sphere; add 20% margin so you are not repositioning mid-measurement.
- Require absolute encoders for shop-floor use — they eliminate the reference-point warm-up routine and preserve accuracy after power interruptions.
- Match software to task: PolyWorks or PC-DMIS for GD&T inspection; Geomagic Control X or Design X for scan-to-CAD reverse engineering.
- Verify the arm's calibration certificate is current (typically 12-month interval) and that the seller includes the calibration sphere and probe kit — missing accessories add significant replacement cost.
Specs
| Arm Architecture | 6-axis articulated / 7-axis with LLP |
|---|---|
| Volumetric Accuracy | ±0.024 mm to ±0.085 mm (probe) |
| Reach Class | 1.2 m / 2.4 m / 3.0 m / 3.5 m / 4.0 m |
| Encoder Type | Absolute (Quantum) vs Incremental |
Related searches
What to check before buying
- Measure the largest part's diagonal and confirm the arm's working volume exceeds it by at least 20% to avoid repositioning.
- Confirm floor space and mounting: FaroArms ship with a rolling stand or tripod; verify the stand footprint and wheel clearance for your shop aisle.
- Check electrical: FaroArm chargers require 100–240 VAC; confirm plug type matches your region and that battery packs (Quantum) are included.
- Verify computer interface: legacy arms use USB 2.0 or ethernet; Quantum uses Bluetooth 2.0+EDR — confirm your laptop or workstation has the matching port and OS driver support.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 21, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.