DIY Tool Picks

Leica Laser Tracker Buying Guide

A Leica laser tracker is a portable metrology instrument that measures large parts and assemblies to sub-thousandth tolerances using laser ranging, angular encoders, and a retroreflective target. The core trade-off is absolute-interferometer accuracy and whole-volume calibration versus the cost and setup discipline of a metrology-grade system that requires a trained operator. The decision rule: buy a tracker only when you need verified large-volume geometry on the shop floor; for smaller parts or simple layout, a laser distance meter or portable CMM is the right tool.

Platform:AT401/AT403 vs AT500/AT960Max Range:320 m with 1.5-inch SMRAccuracy:10-15 µm + 5-6 µm/mMeasurement Type:Absolute Interferometer (ADM)

At a glance

Price range
Price range not synced yet
Category
Measuring & Layout Tools
Data updated
Nov 21, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Leica Absolute Interferometer (AT401/AT402/AT403/AT500/AT930/AT960) combines interferometry and absolute distance measurement for single-operator, single-beam measurement without a warm-up cycle.
  • Generation gaps matter: AT401/AT402 offer 320 m range with 15 µm + 6 µm/m accuracy; AT403 adds 320 m range and 10 µm + 5 µm/m together with an integrated camera and Bluetooth.
  • AT500/AT960 are the newer platform with 320 m range, up to 1 kHz sampling and IP54 shop-floor rating; AT930 is the higher-accuracy variant of the same platform.
  • Standard accessories are not optional: 1.5-inch retroreflector, world-lock and T-probe enable 6DoF probing; without an SMR and field-of-view planning the tracker cannot measure.

Best use cases

  • Best fit: large aerospace, automotive tooling, shipyard and wind-energy assembly where part envelopes exceed 5 m and tolerances are tighter than ±0.1 mm — pick the AT960/AT930 platform for shop-floor IP54 and fast sampling.
  • Best fit: calibration and certification labs that need traceable 6DoF probing with a T-probe/T-scan and a 1.5-inch SMR — choose AT403 or AT500 with camera and Bluetooth for one-hand operation.
  • Wrong fit: general layout, site setting-out, or furniture/frame measuring under 10 m — a laser distance meter or rotary laser is faster and far cheaper; that is the category to skip.
  • Wrong fit: small parts, fixtures, or reverse engineering under 1 m — a portable articulated-arm CMM delivers better accuracy without line-of-sight constraints; avoid the tracker.

Buying tips

  • Match range to the largest diagonal of your work envelope plus 20%: 320 m is the ceiling, but maximum range drops sharply with SMR size, ambient light and beam interruptions.
  • Check accuracy specification format: Leica publishes accuracy as a fixed term plus a per-metre term (e.g., 15 µm + 6 µm/m), so the error at 10 m is far larger than the datasheet headline figure.
  • Prefer the ADM-capable Absolute Interferometer generation (AT401 and later); older pure-interferometer trackers need a home position and are slower to set up.
  • Verify power and interface standards: 100–240 V AC external supply or battery, Ethernet and Wi-Fi connectivity, and whether the controller software (SpatialAnalyzer, PolyWorks, PC-DMIS) is licensed separately.

Specs

PlatformAT401/AT403 vs AT500/AT960
Max Range320 m with 1.5-inch SMR
Accuracy10-15 µm + 5-6 µm/m
Measurement TypeAbsolute Interferometer (ADM)

Related searches

What to check before buying

  • Measure the largest diagonal of your part and confirm it sits well inside the 320 m maximum range with margin for beam breaks.
  • Confirm floor and foundation stability: a tracker tripod or pillar must not vibrate during measurement; check for overhead crane and HVAC airflow in the beam path.
  • Verify line of sight from the planned tracker station to every target point; plan at least two tracker stations for full 360° coverage of large assemblies.
  • Check electrical environment: regulated 100–240 V supply, clean ground, and no heavy welding or induction equipment on the same circuit as the tracker electronics.

FAQ

All Measuring & Layout Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 21, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.