DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Sawhorse Buying Guide

A sawhorse is a temporary support structure for holding workpieces or forming a cutting table, and the core trade-off is between fixed-height steel trestles (fast, stable, cheap) and adjustable or folding multi-function benches (versatile but heavier and more complex). Buy fixed steel trestles for pure cutting support; buy adjustable or folding models only when you need height matching, portability, or a built-in table surface.

Type:Fixed trestle / Folding / TelescopicMaterial:Steel tube, 1–1.5 mm wallHeight Range:24–30 in fixed / 24–39 in adj.Pair Capacity:250–550 lb per unit
Typical price range$65.99 – $142.64

At a glance

Category
Workbenches & Shop Equipment
Data updated
Nov 20, 2026

Current offers

Highlights

  • Steel trestles typically use 1–1.5 mm wall tube with cross-bracing; lighter 0.8 mm tube flexes under lateral cutting loads and is a compromise tier.
  • Fixed-height sawhorses sit around 24–30 in (610–760 mm); adjustable telescopic models cover roughly 24–39 in (610–1000 mm) for uneven floors and tall users.
  • Folding 7-in-1 workbench sawhorses pair a 1090 x 550 mm top with 550 lb (250 kg) capacity via locking leg hinges and a tool-lock mechanism.
  • Pair capacity, not per-unit capacity, is the real limit: two 250 lb horses share load, but an uneven floor or soft ground reduces effective stability.

Best use cases

  • Cutting lumber and sheet goods on site: pick fixed-height steel trestles with cross-bracing and rubber feet; skip folding bench hybrids that add weight and setup time.
  • Garage workshop with limited storage: pick folding sawhorses with a carry handle and fast-open legs; skip fixed trestles that cannot collapse.
  • Uneven floors or tall users: pick telescopic adjustable trestles with locking pins; skip fixed-height models that force stooping or raise the work too high.
  • Heavy assembly or sustained hand-planing: pick a 7-in-1 folding workbench rated near 550 lb with a full top; skip lightweight plastic or thin-steel trestles that rack under sideways force.

Buying tips

  • Match height to task: ripping sheet goods wants 30–36 in support height; hand-planing wants lower, around 24–28 in, for leverage.
  • Require at least 1 mm steel wall thickness and cross-bracing on folding legs; thin tube and single-pivot hinges wobble under saw vibration.
  • For two-horse setups, confirm each unit's rated capacity and that the pair shares load evenly; a 250 lb per-horse rating supports about 500 lb only when load is centered.
  • Choose locking pin or cam adjustment over friction collars for telescopic legs; friction collars slip under load and are a compromise tier.

Specs

TypeFixed trestle / Folding / Telescopic
MaterialSteel tube, 1–1.5 mm wall
Height Range24–30 in fixed / 24–39 in adj.
Pair Capacity250–550 lb per unit

Related searches

What to check before buying

  • Measure your workpiece length and support spacing: a 8 ft board needs horses placed about 1–2 ft from each end, not at the extremes.
  • Check floor type: rubber or non-marring feet for finished concrete and decking; spikes or wide pads for uneven ground.
  • Confirm folded dimensions and weight fit your storage space and vehicle if the horses will travel to job sites.
  • For bench-style units, verify the top size (e.g., 1090 x 550 mm) against your largest sheet or assembly footprint before buying.

FAQ

All Workbenches & Shop Equipment buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.