DIY Tool Picks

DIY Tool Picks

Tools & Home Improvement Reviews & Buying Guides

Compare tools & home improvement by use case, features, trade-offs, price, returns, and seller terms before you buy.

Buying guides

Woodworking Saws & Planers

Cordless Miter Saw

A cordless miter saw trades the unlimited power of a corded tool for jobsite mobility, so the primary decision is battery platform and blade capacity versus cut capacity and runtime. The clear rule: buy into a battery system you already own or plan to standardize on, and accept a 7-1/4-inch or 8-1/4-inch blade for portability; step up to a 10-inch or 12-inch cordless only if you routinely cut thick stock and have high-capacity batteries.

Woodworking Saws & Planers

Dewalt Planer

A DeWalt planer is a benchtop thickness planer engineered around a rigid steel base and a high-speed cutterhead, used to dimension rough lumber to uniform thickness. The core trade-off is cutterhead architecture: two-blade conventional knives versus a three-knife or helical-style insert head, which determines cut quality, noise, and long-term blade cost. Buy the helical/insert-head tier for figured hardwood and heavy daily use; buy the two-knife tier only for softwood dimensioning and occasional trim work.

Woodworking Saws & Planers

Makita Electric Hand Planer

A Makita electric hand planer is a portable wood-shaping tool that removes material from boards and doors with a rotating cutter head, and the defining trade-off is motor wattage/amp draw versus cutter-head width and depth-of-cut control. Buyers should choose a model whose blade width matches their typical stock width and whose depth adjustment offers fine, repeatable increments, not just the fastest stock removal. The decisive separation is between brushless/resettable-depth models built for continuous shop use and older brushed designs with less precise depth stops.

Woodworking Saws & Planers

Makita Electric Planer

A Makita electric planer is a handheld or benchtop woodworking tool that uses a rotating cutter head to dimension and surface lumber, and the core trade-off is between the 3-1/4-inch class (more stable, deeper cuts, heavier) and the 2-3/4-inch class (lighter, one-hand friendly, shallower). The decisive rule: choose a model with a precision-machined aluminum base, dual-edge or carbide reversible blades, and a rebate depth stop if you need repeatable joinery; skip plastic-base, single-blade designs that flex and tear out.

Woodworking Saws & Planers

Milwaukee Cordless Planer

Milwaukee cordless planers are 12V or 18V hand-held wood planers built for trim carpentry and jobsite stock removal, where the core trade-off is battery-platform lock-in and cut depth versus a corded planer's continuous power. The decision rule is simple: buy only if you already own Milwaukee M12 or M18 batteries and need portability for chamfers, door fitting, or scribing; skip cordless if you plane wide slabs or run continuous production where a corded 3¼-inch planer wins on duty cycle.

Woodworking Saws & Planers

Mini Electric Hand Saw

A mini electric hand saw is a compact, one-handed cutting tool—typically a 3- to 4-inch circular or reciprocating saw—used for light-duty trim, PVC, drywall, and branch work where a full-size saw is too bulky. The core trade-off is motor type and blade arbor: brushed motors with 3/8-inch arbors cut slowly and overheat under load, while brushless motors with 1/4-inch hex or 20mm arbors deliver sustained torque and clean, replaceable-blade cuts. The decision rule: buy brushless with a standard replaceable blade system for repeated cuts; choose a brushed mini saw only for occasional, thin-material tasks.

Woodworking Saws & Planers

Mini Hand Saw Electric

A mini hand saw electric is a compact, one-handed powered saw—typically a 3- to 5-inch circular or reciprocating tool—used for quick cuts where a full-size saw won't reach. The primary trade-off is motor type and blade size: brushed motors with 2- to 3-inch blades cut slowly and overheat, while brushless motors with 3- to 4-inch blades deliver clean, sustained cuts. The decision rule: buy only models with a brushless motor, a standard arbor or blade interface, and a trigger with lock-off—skip brushed single-speed tools with proprietary blades.

Woodworking Saws & Planers

Portable Hand Saw

A portable hand saw is a manually powered cutting tool designed for one-handed or compact two-handed use, spanning traditional push-stroke panel saws, pull-stroke Japanese saws with hardened teeth, and folding or nested saws for packability. The core trade-off is tooth geometry and steel hardness versus blade thickness and kerf: thinner, harder, impulse-hardened teeth cut faster and stay sharp but cannot be resharpened, while thicker carbon-steel blades track straighter and can be filed. Decide by cutting direction preference (push vs pull), whether you need resharpenability, and whether the saw must fold or nest for transport.

Woodworking Saws & Planers

Ryobi Cordless Planer

A Ryobi cordless planer is a battery-powered handheld thickness planer for edge-jointing, chamfering, and surfacing lumber on site without a cord. The primary trade-off is depth-of-cut capacity and blade life versus battery platform compatibility and runtime: 18V ONE+ models deliver 1/16-inch max depth per pass with two reversible carbide blades, while lower-tier or older tools may use high-speed steel and shallower cuts that dull faster in hardwood. The decision rule is simple: buy a two-blade carbide model with a 3-1/4-inch width and 1/16-inch depth capacity on the 18V ONE+ platform only if you already own Ryobi batteries; skip any single-blade or HSS-blade unit for hardwood work.

Woodworking Saws & Planers

Small Electric Saw

A small electric saw is any compact powered cutting tool—circular, jigsaw, reciprocating, or table-top—built for one-hand or benchtop use in tight spaces and light stock. The primary trade-off is motor type and blade architecture: brushed motors with stamped bases cut slowly and wander, while brushless motors with cast or machined bases hold tolerance through dense hardwood. The decision rule is simple: buy brushless with a tool-free blade change and a metal base for repeated hardwood work; choose brushed only for occasional softwood or foam-board tasks where low duty cycle is acceptable.

Woodworking Saws & Planers

Small Saw

Small saws span benchtop table saws, compact miter saws, and handheld circular saws, each trading cut capacity and portability against rigidity and dust control. The core trade-off is cast-aluminum or steel table/fence stiffness versus plastic base flex, which determines whether cuts stay square under load. Choose a brushless direct-drive unit with a metal table and standard 5/8-inch arbor for durability; skip plastic-base or non-standard-arbor models that flex and limit blade choice.

Wood Routers & Carving Tools

Router Carving Bit

Router carving bits are the cutting edge of any router—literally—and their geometry, carbide grade, and shank compatibility determine whether you get clean profiles or burn marks. The core trade-off is between high-speed-steel (HSS) bits that stay sharp cheaply but dull fast in hardwood, and solid carbide or carbide-tipped bits that hold an edge through abrasive MDF and exotic lumber. The decision rule: match bit material and geometry to your material and router collet; never buy a carving bit set without confirming 1/4-inch or 1/2-inch shank compatibility and chip clearance for your depth of cut.

Wood Routers & Carving Tools

Wood Carving Chisel Set

A wood carving chisel set is a matched group of bevel-edged, gouge, and V-tool blades heat-treated for edge retention and ground for controlled hand pressure—not a generic bench chisel kit. The core trade-off is steel hardness versus toughness: harder Rockwell ratings (58–62 HRC) hold an edge longer but chip under mallet blows, while softer alloys sharpen faster but dull quickly. The decision rule is simple: buy a set whose steel grade, handle ferrules, and blade geometry match your wood species and whether you strike with hand pressure only or a mallet.

Wood Routers & Carving Tools

Wood Carving Router Bit

Wood carving router bits are shaped cutting tools—round-nose, V-groove, core-box, and bowl bits—that turn a fixed-base or plunge router into a carving machine for signs, relief work, and hollow forms. The defining trade-off is carbide grade and cutter geometry versus shank size and router horsepower: small 1/4-inch-shank bits suit trim routers and fine detail, while 1/2-inch-shank bits are mandatory for deep cuts and hardwoods. Buy only solid-carbide or carbide-tipped bits with a rated RPM ceiling above your router's top speed; steel or unrated bits are consumables that dull and burn wood.

Power Tools

1 Drive Cordless Impact

A 1/2-inch drive cordless impact wrench is the standard high-torque tool for lug nuts, suspension bolts, and heavy fasteners, trading ultimate compactness for raw breakaway power. The core decision is battery platform voltage and motor type: 18V–20V brushless units deliver 300–700 ft-lbs of nut-busting torque, while 12V subcompact models cap out far lower. Buy a brushless 18V/20V model with a proven battery ecosystem if you need real lug-nut capability; skip 12V or brushed units for automotive service.

Power Tools

Circular Saw With Dust Collection

A circular saw with dust collection pairs a high-RPM cutting blade with either an integrated dust port or a sealed shroud to capture sawdust at the source. The primary trade-off is airflow versus cut visibility: aggressive dust extraction requires tight blade shrouds and high-CFM vacuums, while open-base saws cut faster but leave debris. Buy a saw whose port diameter matches your vacuum hose and whose shoe and retraction spring survive daily jobsite abuse; skip any model with a friction-fit port and a stamped aluminum shoe.

Power Tools

Heavy Duty Bench Grinder

A heavy duty bench grinder is a permanently mounted shop tool built for continuous grinding, sharpening, and wire-brushing of hard metals and tools. The core trade-off is motor architecture and wheel quality: capacitor-start induction motors with sealed bearings and cast housings deliver sustained 3/4-1 HP torque, while cheap universal-motor units overheat and vibrate under load. The decision rule is simple: buy a capacitor-start induction motor rated for continuous duty (wheel 8 in or larger) with cast-iron base and tool rests; skip any grinder under 1/2 HP or with plastic body components for heavy fabrication work.

Power Tools

Milwaukee Cordless Chisel Hammer

A Milwaukee cordless chisel hammer is a demolition-focused SDS-max or SDS-plus rotary hammer (or dedicated breaker) that delivers impact energy without rotation for chiseling concrete, tile, and masonry. The core trade-off is impact energy and vibration control versus weight and battery platform compatibility, with SDS-max tools reserved for heavy demolition and SDS-plus tools for light chipping. The decisive rule: buy a dedicated chipping model with low-vibration handles and the correct SDS chuck for your work, and avoid rotary hammers that only offer a chisel mode as an afterthought.

Plumbing Tools

Heavy Duty Chain Wrench

A heavy-duty chain wrench is a high-torque plumbing tool that wraps a hardened chain around large pipes, fittings, or irregular shapes to break stubborn joints without crushing the pipe wall. The decisive trade-off is chain tensile strength and jaw forging versus handle leverage and tooth engagement: budget wrenches use stamped jaws and low-grade chain that stretch or snap under load, while professional tiers use drop-forged alloy jaws and heat-treated chain rated for pipe diameters up to 8 inches. The clear rule: buy only wrenches with a drop-forged jaw, a heat-treated chain rated for the maximum pipe size you service, and a handle that accepts a cheater bar.

Measuring & Layout Tools

Bosch Glm 40 Professional

The Bosch GLM 40 Professional is a compact laser distance measurer rated for 40 m, built for fast one-person room and layout measurements. The core trade-off is between a basic single-point laser and a model with tilt/angle sensing, Bluetooth, and a color display—the GLM 40 sits at the durable entry tier with real Bosch build quality but no angle sensor or app connectivity. Choose it only if you need repeatable straight-line distance and area/volume math; step up to a tilt-capable model if you regularly measure diagonals, sloped ceilings, or need photo-documented layouts.

You may also like

Finding more guides for you…