Dewalt Planer Buying Guide
A DeWalt planer is a benchtop thickness planer engineered around a rigid steel base and a high-speed cutterhead, used to dimension rough lumber to uniform thickness. The core trade-off is cutterhead architecture: two-blade conventional knives versus a three-knife or helical-style insert head, which determines cut quality, noise, and long-term blade cost. Buy the helical/insert-head tier for figured hardwood and heavy daily use; buy the two-knife tier only for softwood dimensioning and occasional trim work.
At a glance
- Price range
- Price range not synced yet
- Category
- Woodworking Saws & Planers
- Data updated
- Nov 20, 2026
Current offers
Highlights
- DeWalt benchtop planers use a three-knife cutterhead on the DW735 series and a two-knife head on the DW734/DW733, directly affecting cut finish and knife-replacement cost.
- The DW735/X model ships with a dust-ejection fan and two-speed gearbox (roughing vs finishing feed), while the DW734 is single-speed with a slower 8,000 RPM cutterhead.
- Maximum stock removal is 1/8 inch per pass on DW735-class machines; deeper passes overload the motor and produce snipe on the infeed and outfeed ends.
- All current DeWalt planers run on 120V household current and require a dedicated 15-amp circuit; the 15-amp universal motor draws near the circuit limit under continuous load.
Best use cases
- Best fit: DW735-class helical or three-knife planer for a shop milling rough-sawn hardwood, where insert/knife life and finish quality justify the higher machine weight and cost.
- Best fit: DW734 two-knife planer for a garage woodworker surfacing pine and poplar to consistent thickness on weekend projects, where a lighter, lower-cost unit is sufficient.
- Wrong fit: skip any benchtop planer for milling full 8/4 hardwood slabs or daily production runs; step up to a stationary 15-inch planer with a cast-iron table and feed rollers.
- Wrong fit: do not buy a planer as a jointer substitute; a planer only makes two faces parallel, so you still need a jointer or sled for flat face and square edge.
Buying tips
- Choose the three-knife or insert-head model when working figured maple, walnut, or quartersawn oak; the two-knife head tears out more and requires more frequent knife indexing.
- Match planer width to your stock: 12.5-inch and 13-inch benchtop models cover most furniture boards, but ripping wider stock first avoids the 13-inch maximum depth-of-cut limit.
- Budget for a mobile base and a 4-inch dust-collection hose; the DW735's onboard fan helps but a dedicated collector is needed to prevent chip buildup on the rollers.
- Check cutterhead generation before buying used: earlier DW735 units lack the updated knife-lock design, and replacement knives differ between the two-knife and three-knife heads.
Specs
| Cutterhead Type | 2-knife vs 3-knife vs helical insert |
|---|---|
| Max Cutting Width | 12.5–13 in benchtop class |
| Feed Rate | Single-speed vs 2-speed (rough/finish) |
| Power / Circuit | 15 Amp, 120V dedicated circuit |
Related searches
What to check before buying
- Measure your shop circuit: confirm a dedicated 15-amp, 120V outlet within cord reach; planers should not share a circuit with a dust collector or table saw.
- Verify bench or stand footprint: DW735-class units weigh roughly 90–100 lb and need a stable 24-by-24-inch footprint or a matching mobile base.
- Confirm infeed/outfeed clearance: allow at least 4 feet on each side for 8-foot boards, or plan to use roller stands at table height.
- Check dust port diameter against your collector: DeWalt benchtop planers use a 4-inch port, and a 2.5-inch shop-vac adapter is required for smaller hoses.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
