Greenlee Knockout Set Buying Guide
A Greenlee knockout set is a hydraulic or manual punch system for cutting clean, accurate holes in electrical enclosures, panels, and conduit boxes. The core trade-off is between manual ratchet drivers and hydraulic pumps: hydraulic sets deliver faster, lower-effort punches on thick steel, while manual sets cost less and suit light-gauge work. The decision rule is simple: match the driver type and tonnage to your steel thickness and hole diameter, and always confirm the set includes the exact dies and draw studs for your target conduit sizes.
At a glance
- Price range
- Price range not synced yet
- Category
- Electrician Hand Tools
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Manual ratchet sets (e.g., Greenlee 7238SB) use a hand-powered draw stud and are rated for mild steel up to 10 gauge (0.134 in), ideal for occasional light-duty work.
- Hydraulic sets (e.g., Greenlee 7646) pair a hand pump with a ram cylinder, delivering up to 15 tons of force to punch 4-inch holes in 10-gauge steel with minimal operator effort.
- Knockout dies are sized by conduit trade size (1/2 in to 4 in) and require a matching draw stud; sets ship with specific die stacks, so a 1/2–2 in set will not cut 3 in or 4 in holes without additional dies.
- Greenlee punches are made from hardened tool steel and are designed for mild steel, aluminum, and plastic; they are not rated for stainless steel or hardened materials unless explicitly specified.
Best use cases
- Best fit: an electrician routinely punching 1/2 in to 2 in holes in 10-gauge steel enclosures should choose a hydraulic set with a 15-ton ram for speed and repeatability.
- Wrong fit: a DIYer cutting occasional 1/2 in holes in 16-gauge junction boxes should skip the hydraulic set and buy a manual ratchet set to save cost and storage space.
- Best fit: a contractor working on 3 in or 4 in conduit runs must select a set that includes the larger dies and a high-tonnage hydraulic pump; a 1/2–2 in set will not cover those sizes.
- Wrong fit: anyone punching stainless steel or thick aluminum plates should not use standard Greenlee knockout sets; these are rated for mild steel and require a specialized punch or hole saw.
Buying tips
- Match the set's maximum tonnage to your steel thickness: 10-gauge mild steel needs about 15 tons for a 4 in hole; thinner 16-gauge steel can be cut with a manual ratchet set.
- Verify the die range: sets are sold as 1/2–2 in, 1/2–4 in, or specific single sizes; buy the range that covers all conduit trade sizes you regularly punch.
- Check the draw stud thread and length: Greenlee sets use specific studs for different punch sizes; ensure the set includes the correct stud for your largest die.
- Prefer sets with a carrying case and a complete die stack; missing dies or studs are common in used sets and cost extra to replace.
Specs
| Driver Type | Manual ratchet vs hydraulic pump |
|---|---|
| Max Steel Capacity | 10-gauge mild steel (0.134 in) |
| Hole Size Range | 1/2 in to 4 in trade size |
| Punch Material | Hardened tool steel |
Related searches
What to check before buying
- Measure the steel thickness of your enclosure or panel; confirm it is mild steel within the set's rated capacity (typically 10-gauge max for hydraulic sets).
- List every conduit trade size you need to punch (1/2 in to 4 in) and confirm the set includes dies for each size.
- Check the hydraulic pump's fluid type and seal compatibility if the set is used; Greenlee pumps typically use hydraulic oil and require periodic bleeding.
- Verify the set includes a plastic or metal carrying case and the correct draw studs for all included dies; missing parts are expensive to source separately.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
