DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

General Tool Mmd950 Buying Guide

The General Tool MMD950 is a pin/pinless deep-sensing moisture meter used to detect moisture behind tile, wood, and concrete without surface damage. The core trade-off is sensor depth versus accuracy: deep-sensing models scan farther into substrates but need calibration checks, while shallow pin meters give direct resistance readings. Buy the MMD950 only for non-destructive deep scanning; choose a pin-only meter when you need precise wood-moisture percentages.

Sensor Type:Pin + pinless capacitive dual modeScan Depth:Deep-sensing through tile/concreteHousing:Plastic, gray/yellow handheldBest Substrate:Tile, concrete, drywall, wood
Typical price range$100.00

At a glance

Category
Measuring & Layout Tools
Data updated
Nov 20, 2026

Current offers

Highlights

  • Dual-mode sensing: pinless capacitive scan for deep, non-destructive readings plus pin probes for direct contact resistance measurement.
  • Deep-sensing pinless mode reads through tile, drywall, and concrete to locate hidden moisture without surface damage.
  • Pin mode delivers direct resistance-based moisture content, which is more repeatable for wood and thin materials.
  • Plastic housing and gray/yellow body suit handheld site use; it is a diagnostic scanner, not a lab-grade meter.

Best use cases

  • Best fit: restoration and tile contractors scanning behind tile, shower walls, and concrete slabs for hidden leaks — use pinless deep mode.
  • Best fit: woodworkers and flooring installers checking board moisture before installation — use pin mode for direct readings.
  • Wrong fit: buyers wanting a calibrated wood moisture content percentage for kiln-dried lumber — pick a pin-only meter with species correction.
  • Skip if you only need surface damp checks on drywall — a basic pin meter is cheaper and sufficient.

Buying tips

  • Choose deep-sensing pinless mode for substrates over 1 inch thick; shallow capacitive meters only read near the surface.
  • Use pin mode for wood and thin materials: direct resistance gives repeatable readings, while pinless readings vary with density and thickness.
  • Confirm the meter ships with a known calibration or reference check; deep-sensing readings drift and need baseline verification.
  • Prefer models with separate pin and pinless modes rather than pinless-only, so you can cross-check readings on the same spot.

Specs

Sensor TypePin + pinless capacitive dual mode
Scan DepthDeep-sensing through tile/concrete
HousingPlastic, gray/yellow handheld
Best SubstrateTile, concrete, drywall, wood

Related searches

What to check before buying

  • Measure your substrate thickness: deep-sensing pinless mode is needed for tile over backer board and concrete slabs.
  • Check the meter includes both pin probes and pinless plate; pin-only or pinless-only models limit cross-checking.
  • Confirm battery type and availability (typically 9V) so the meter works on site without proprietary cells.
  • Verify the display is readable in low light and the housing survives job-site drops; plastic bodies vary in durability.

FAQ

All Measuring & Layout Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.