Photos from current listings. Actual item, color, and included accessories may vary.
Electric Submersible Water Pump Buying Guide
Electric submersible pumps place the motor and impeller underwater, so the defining trade-off is head pressure versus flow rate at the voltage you actually have. Deep-well models use 4-inch stainless bodies with 115V or 230V motors, and the correct pick is set by total lift plus friction loss, not by horsepower alone.
Pump Voltage:115V or 230V / 60HzWell Casing Fit:4 in stainless deep-well bodyHead / Flow Range:167-640 ft / 28-37 GPMIngress Rating:IP68 continuous immersion
Typical price range$140.99 – $268.99
At a glance
- Category
- Plumbing Tools
- Data updated
- Nov 20, 2026
Current offers
Deep Well Submersible Pump, 0.5HP 230V/60Hz, 28gpm 167ft Head, With 33ft Electric Cord, 4" Stainless Steel Water Pumps For Industrial, Irrigation And Home Use, IP68 Waterproof Grade$140.99
View on Mallflare
Deep Well Submersible Pump, 0.5HP 115V/60Hz, 28gpm Flow 167ft Head, With 33ft Electric Cord, 4" Stainless Steel Water Pumps For Industrial, Irrigation&Home Use, IP68 Waterproof Grade$144.99
View on Mallflare
Deep Well Submersible Pump, 1HP 115V/60Hz, 37gpm Flow 207ft Head, With 33ft Electric Cord, 4" Stainless Steel Water For Industrial, Irrigation&Home Use, IP68 Waterproof Grade$145.99
View on Mallflare
Deep Well Submersible Pump, 1HP 230V/60Hz, 37gpm Flow 207ft Head, With 33ft Electric Cord, 4" Stainless Steel Water For Industrial, Irrigation&Home Use, IP68 Waterproof Grade$163.99
View on Mallflare
Deep Well Submersible Pump, 1.5HP 230V/60Hz, 37gpm 276ft Head, With 33ft Electric Cord, 4' Stainless Steel Water Pumps For Industrial, Irrigation And Home Use, IP68 Waterproof Grade$182.99
View on Mallflare
Deep Well Submersible Pump, 37GPM Flow 427 Ft Head, With 33 Ft Electric Cord, 4 Inch Stainless Steel Water Pumps For Industrial, Irrigation & Home Use, IP68 Waterproof Grade$200.99
View on Mallflare
Deep Well Submersible Pump, 3HP/2200W 230V/60Hz, 37GPM Flow 640 Ft Head, With 33 Ft Electric Cord, 4 Inch Stainless Steel Water Pumps For Industrial, Irrigation & Home Use, IP68 Waterproof Grade$268.99
View on Mallflare
Highlights
- Deep-well 4-inch pumps are sized by head (ft) and flow (GPM) simultaneously: a 0.5HP unit delivers roughly 28 GPM at 167 ft while 3HP reaches about 640 ft at 37 GPM.
- Voltage tiers change wiring, not performance: 115V/60Hz runs on standard household circuits; 230V/60Hz needs a dedicated double-pole breaker and cuts current draw roughly in half.
- IP68 rating means dust-tight and continuously immersed; stainless-steel pump bodies and cast housings resist corrosion in well water better than thermoplastic shells.
- A 33 ft factory cord suits wells up to about 30 ft deep; deeper settings need a splice kit and properly sized submersible cable to avoid voltage drop.
Best use cases
- Best fit: a 4-inch cased residential well 30-200 ft deep with moderate demand uses a 0.5-1HP, 230V stainless deep-well pump; skip 115V if the run exceeds 100 ft of drop.
- Best fit: shallow cistern, sump, or irrigation draw under 20 ft of lift uses a low-head utility submersible; skip deep-well 3HP models because they waste power and can over-pressurize small lines.
- Best fit: high-lift or long-run irrigation needing 200-400 ft of head uses the 1.5-2HP tier; skip 0.5HP because flow collapses as head rises.
- Wrong fit: 115V household wiring with a 3HP pump—the motor draws too much current for a 15A circuit and will trip or burn out.
Buying tips
- Add static water depth, drawdown, and friction loss (about 1 ft per 10 ft of pipe) to get total head, then choose a pump whose published curve still delivers required GPM at that head.
- Match voltage to the circuit: 115V works on 15-20A household branch circuits; 230V requires a dedicated 2-pole breaker sized to motor amps plus 25%.
- Confirm well casing is at least 4 inches internal diameter for a 4-inch pump, and add a torque arrestor and safety rope on deep settings.
- Choose stainless-steel bodies and cast-iron or stainless discharge heads for corrosion resistance; thermoplastic pumps are only for intermittent, clean-water duty.
Specs
| Pump Voltage | 115V or 230V / 60Hz |
|---|---|
| Well Casing Fit | 4 in stainless deep-well body |
| Head / Flow Range | 167-640 ft / 28-37 GPM |
| Ingress Rating | IP68 continuous immersion |
Related searches
What to check before buying
- Measure well depth, static water level, casing inside diameter, and vertical lift before selecting horsepower or voltage.
- Verify the electrical supply: 115V on a 15-20A circuit or 230V on a dedicated double-pole breaker with correct wire gauge for the run.
- Confirm the required flow rate in GPM for household fixtures or irrigation zones, then read the pump curve at your total head.
- Budget companion parts: pressure tank, pressure switch, check valve, torque arrestor, and submersible cable splice kit for depths beyond the 33 ft cord.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.