Photos from current listings. Actual item, color, and included accessories may vary.
Propress Tool Buying Guide
A propress tool is a battery-powered crimping press that joins copper, PEX, and stainless pipe via standardized VUS/VPF jaws and press fittings, replacing soldering with a 2–4 second mechanical compression. The decisive trade-off is jaw force and jaw-set completeness versus tool weight and battery platform: 24–32 kN compact units cover 1/2–1 inch residential work, while full 32 kN 6-jaw kits are required for 1-1/4 to 2 inch mains and commercial runs. Buy a tool whose jaw set and force rating match your largest pipe size, from a brand with serviceable jaws and a battery platform you can expand.
At a glance
- Category
- Plumbing Tools
- Data updated
- Nov 20, 2026
Current offers
ProPress Tool, 18V Electric Pipe Crimping For 1/2", 3/4", 1", 1 -1/4", 1 -1/2", 2" Copper Pipes, 32KN Pro Press With 6 VUS Jaws, 2PCS 4AH Batteries, Fast Charger & Carrying Case$1,168.99
View on Mallflare
18V Press Tool with 4 Jaws for 1/2" 3/4" VUS Copper & VPF PEX Pipes, 24KN Compact Pipe Crimping Kit, Compatible ProPress & PureFlow - 2pcs 2AH Battery, Fast Charger & Toolbox$958.99
View on Mallflare
ProPress Tool Kit, 18V Electric Pipe Crimping For 1/2", 3/4", 1" Copper Tubes, Pro Press Crimper With 3 VUS Jaws, 2pcs 2AH Batteries, Fast Charger & Carrying Case$680.99
View on Mallflare
Pro Press Tool, 18V Electric Pipe Crimping For 1/2" To 2" Stainless Steel, Copper, PEX Pipes, Kit With 6 Pro Jaws, 2PCS 4AH Battery, Fast Charger & Carrying Case$1,090.99
View on Mallflare
Highlights
- Press force classes: 24 kN compact tools handle 1/2–3/4 inch; 32 kN full-size tools are required for 1 inch and larger copper and stainless joints.
- Jaw standards: VUS profile for copper/steel press fittings, VPF profile for PEX (PureFlow/ASTM F1807-style); mismatched jaw profiles create leak-prone joints.
- Jaw-set sizing: 4-jaw kits (1/2, 3/4, 1 inch plus one larger) leave gaps; 6-jaw kits cover 1/2 through 2 inch continuously, which matters for whole-house repiping.
- Battery platform: 18V 4Ah packs deliver the cycle count for 2 inch presses; compact 2Ah packs suit 1/2–3/4 inch trim work but sag under large-jaw load.
Best use cases
- Whole-house copper repipe including 1-1/4 to 2 inch mains: choose the 32 kN 6-jaw kit with 4Ah batteries; skip 24 kN compacts that stop at 1 inch.
- Residential service and fixture swaps on 1/2–3/4 inch copper and PEX: the 24 kN 4-jaw compact kit is the right balance of weight and reach; skip the 2 inch jaw set you will not use.
- Commercial or multi-unit work with stainless and mixed copper/PEX: buy the 32 kN kit with both VUS and VPF jaws; a copper-only jaw set forces a second tool purchase.
Buying tips
- Match force to pipe: 24 kN for 1/2–3/4 inch, 32 kN for 1 inch and above; under-forcing large fittings produces incomplete crimps that fail pressure tests.
- Count jaw coverage against your largest pipe: a 6-jaw set spanning 1/2–2 inch avoids buying individual jaws later at higher cost.
- Confirm jaw profile compatibility: VUS jaws fit standard copper/steel press fittings; VPF jaws are required for PEX press systems—do not interchange.
- Prefer tools with replaceable jaws and a published service interval; jaw wear is the primary failure point and sealed heads turn a tool into scrap.
Specs
| Press Force | 24 kN compact vs 32 kN full-size |
|---|---|
| Pipe Capacity | 1/2–3/4 in (24 kN); up to 2 in (32 kN) |
| Jaw Profile | VUS copper/steel; VPF PEX press |
| Battery Platform | 18V 2Ah compact / 4Ah full-size |
Related searches
What to check before buying
- Measure your largest pipe outside diameter and fitting size before choosing: 1 inch and larger demands a 32 kN tool, not a compact 24 kN unit.
- Verify jaw profile against your fitting brand: VUS for copper/steel press, VPF for PEX press; confirm the kit includes the sizes you actually run.
- Check battery platform and charger voltage: 18V packs are not cross-compatible between brands, so buy into a platform you can expand.
- Confirm physical clearance: press heads need straight-line access to the fitting; tight joist bays and cabinet interiors may require a compact head or extension.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.