DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Submersible Well Pump Buying Guide

A submersible well pump is a sealed, wet-end motor and impeller stack dropped down a borehole to lift groundwater to a pressure tank. The core trade-off is head-versus-flow sizing against your static water level and pipe friction, plus voltage tier (115V vs 230V) and control-box design that determines whether the pump can be serviced locally. Buy a stainless-steel-bodied unit with a documented head/flow curve that exceeds your measured total dynamic head; skip anything rated only by horsepower.

Motor Tier:0.5HP to 3HP (115V/230V)Body & Seal:4-in stainless, IP68Head Range:167 ft to 640 ftControl Box:Integral under 1.5HP; external above
Typical price range$140.99 – $278.99

At a glance

Category
Plumbing Tools
Data updated
Nov 20, 2026

Current offers

Highlights

  • 0.5HP class delivers roughly 28 GPM at 167 ft head; flow falls as head rises, so size to the pump curve not the peak GPM.
  • Stainless-steel 4-inch bodies with IP68 sealing are the durable standard; thermoplastic bodies are the compromise tier for shallow, low-demand use.
  • 115V models cap out around 1.5HP for standard household circuits; 230V is mandatory above that and preferred for long wire runs.
  • External control-box models (1.5HP and up) separate starting capacitors and overloads from the motor for easier field service.

Best use cases

  • Best fit: 0.5–1HP, 115V stainless unit for a shallow bored well feeding a single household with a 20–40 ft static level — skip 230V if only a 15A circuit exists.
  • Best fit: 1.5–2HP, 230V with external control box for deep static levels (100 ft+) or long lateral runs to a pressure tank — skip 115V above 1.5HP.
  • Best fit: 3HP, 230V for irrigation or multi-fixture demand with 276–640 ft head — skip if total dynamic head is under 150 ft, where a 1HP wastes power.

Buying tips

  • Compute total dynamic head: static water level + drawdown + vertical lift + friction loss in the drop pipe; pick a pump whose curve delivers target GPM at that number.
  • Match voltage to the circuit: 115V for 0.5–1.5HP on 15–20A household breakers; 230V for 1.5HP and above and for runs over 100 ft.
  • Insist on a 4-inch stainless body with IP68 rating and a sealed motor; plastic-bodied pumps fail at the discharge threads under torque.
  • Budget for the companion parts: torque arrestor, safety rope, splice kit, pressure switch, and a pressure tank sized to pump GPM.

Specs

Motor Tier0.5HP to 3HP (115V/230V)
Body & Seal4-in stainless, IP68
Head Range167 ft to 640 ft
Control BoxIntegral under 1.5HP; external above

Related searches

What to check before buying

  • Measure well casing inner diameter — a 4-inch pump needs a 4-inch or larger bore with clearance for the drop pipe and wire.
  • Record static water level and well depth with a sounder; total dynamic head must stay under the pump's rated head with margin.
  • Confirm supply voltage and breaker amperage at the well head; 230V requires a double-pole breaker and correctly sized wire gauge.
  • Verify drop-pipe material and length plus a pressure tank and switch rated for the pump's flow and pressure setpoint.

FAQ

All Plumbing Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.