DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Battery Grease Gun Buying Guide

Battery grease guns replace manual lever pumping with a motorized plunger that delivers consistent high-pressure grease, and the primary trade-off is pressure rating versus battery platform compatibility. Durable options use metal gearboxes and standardized 18V/20V battery interfaces, while compromises rely on plastic internals and proprietary cells that fail under continuous load. Choose a tool that matches your existing battery system and delivers at least 8,000 PSI for automotive work or 10,000+ PSI for heavy equipment.

Max Pressure:8,000–20,000 PSIBattery Platform:18V Makita-compatible / 20V MaxHose Length:35–39 inGrease Capacity:14.5 oz cartridge / bulk fill
Typical price range$77.99 – $302.99

At a glance

Category
Power Tools
Data updated
Nov 20, 2026

Current offers

Highlights

  • Pressure ratings of 8,000 PSI handle most automotive chassis and bearing points; 10,000–20,000 PSI is required for seized fittings and heavy equipment.
  • Bare-tool models accept common 18V Makita or 20V Max battery platforms, eliminating redundant chargers and cells.
  • Metal gearbox and cast-aluminum head construction outlast plastic-bodied units under repeated high-pressure cycling.
  • Hose length of 35–39 inches improves reach to awkward fittings; quick-connect couplers and air-bleed valves prevent trapped air locks.

Best use cases

  • Best fit: Automotive DIY with an existing Makita 18V battery collection — choose a bare-tool 8,000 PSI model with a 35-inch hose to avoid duplicating batteries.
  • Best fit: Fleet or heavy-equipment maintenance — pick a 20V kit rated 10,000–20,000 PSI with two 4.0Ah batteries and a carrying case for all-day field use.
  • Wrong fit: Occasional single-point greasing on a lawnmower — a manual lever gun is lighter, cheaper, and never runs out of charge; skip battery models entirely.
  • Wrong fit: High-volume shop use with no existing battery platform — buying into a bare-tool system without cells and a charger costs more than a complete kit with two batteries.

Buying tips

  • Match the battery interface first: 18V Makita-compatible bare tools suit owners already on that platform; 20V Max kits include proprietary cells and chargers.
  • Select pressure by task: 8,000 PSI covers ball joints and tie rods; 10,000 PSI and above is needed for excavator pins and seized industrial fittings.
  • Prefer metal gearboxes and aluminum pump heads over plastic housings; plastic bodies crack at the hose thread under repeated 8,000+ PSI loads.
  • Check cartridge compatibility: standard 14.5 oz grease cartridges and bulk-fill suction loading cover most use; confirm the follower rod matches your cartridge size.

Specs

Max Pressure8,000–20,000 PSI
Battery Platform18V Makita-compatible / 20V Max
Hose Length35–39 in
Grease Capacity14.5 oz cartridge / bulk fill

Related searches

What to check before buying

  • Verify your existing battery platform voltage and shoe type — an 18V Makita-compatible tool will not accept 20V Max packs without an adapter.
  • Measure the longest reach you need: a 35-inch hose covers most automotive fittings; 39-inch hoses suit recessed equipment points.
  • Confirm the grease fitting type (standard Zerk) and that the coupler seats fully; a loose coupler wastes pressure and causes air locks.
  • Check the tool weight with a full cartridge — units above 7–8 lbs cause fatigue during overhead or extended greasing sessions.

FAQ

All Power Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.