Photos from current listings. Actual item, color, and included accessories may vary.
Battery Powered Chainsaw Buying Guide
A battery-powered chainsaw trades raw gas-engine torque for clean, instant, low-maintenance cutting, with runtime and bar length as the primary compromises. Durable options use brushless motors, sealed lithium-ion packs above 2.0 Ah, and Oregon or equivalent 3/8" LP chain; compromises use brushed motors, sub-1.5 Ah packs, and unhardened chain. The decision rule: match bar length and battery voltage to your cut diameter and duty cycle, and avoid any saw whose chain gauge and pitch are not standard.
At a glance
- Category
- Power Tools
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Brushless motors deliver 30-50% more runtime per charge and survive continuous cutting; brushed motors are for light pruning only.
- Voltage tiers define capability: 18-20V for limbs under 6", 36-40V for 8-10" logs, 56-80V for felling and bucking firewood.
- Standard 3/8" low-profile pitch with .043-.050" gauge chain is widely replaceable; oddball pitch means no off-the-shelf replacements.
- Battery amp-hours set runtime: 2.0 Ah cuts roughly 30-50 limbs; 4.0-5.0 Ah doubles that and sustains 8-10" cuts without thermal shutdown.
Best use cases
- Best fit: yard cleanup and limbing under 6" — pick an 18-20V saw with 10-12" bar, 2.5-4.0 Ah pack, and tool-free chain tensioning.
- Best fit: firewood bucking and storm cleanup up to 10" — step to 36-40V with 14-16" bar and at least two 4.0 Ah batteries for continuous work.
- Wrong fit: felling large hardwoods or all-day clearing — a battery saw cannot sustain the torque; use a gas 50-60cc saw instead.
- Wrong fit: occasional pruning only — a 6" mini top-handle saw is enough; skip 16" bars that add weight without benefit.
Buying tips
- Bar length should exceed your typical cut diameter by 2": a 12" bar handles 8-10" logs safely with the tip clear.
- Choose a saw whose battery platform you already own; cross-platform adapters void warranties and can bypass low-voltage cutoff.
- Require 3/8" LP pitch and .050" gauge chain; verify the drive-link count matches the bar before buying spares.
- For cuts over 8", pick a saw rated at 36V or higher with a brushless motor and metal bucking spikes, not plastic.
Specs
| Motor Type | Brushless vs Brushed |
|---|---|
| Voltage Tier | 18-20V / 36-40V / 56-80V |
| Bar Length | 6-20 in (match cut + 2 in) |
| Chain Standard | 3/8 in LP, .043-.050 in gauge |
Related searches
What to check before buying
- Measure your largest regular cut diameter; add 2" to select bar length, and confirm the saw's max cut is not less than that diameter.
- Confirm your property's outlet voltage and that the charger is 100-240V compatible for your region.
- Check chain replacement availability locally for the saw's pitch and gauge; proprietary chain means ordering online only.
- Verify bar and chain oil reservoir capacity and automatic oiler presence; saws without auto-oiling wear bars fast.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.

