DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Cordless Grease Gun Buying Guide

Cordless grease guns replace manual lever pumps with battery-driven motors that deliver consistent high pressure for chassis, bearing, and equipment lubrication. The core trade-off is pressure and flow rate versus battery platform compatibility and duty cycle; a gun that only reaches 6,000 PSI cannot clear cold or tight fittings, while a 10,000+ PSI unit with a matched 18V/20V battery ecosystem delivers reliable shots without repeated re-priming. The decision rule: buy a gun rated at least 8,000 PSI with a standard 3-jaw coupler and a battery platform you already own, and skip any tool-only listing that lacks a proven coupler or pressure relief valve.

Max Pressure:6,000–20,000 PSIBattery Platform:18V Makita-compatible / 20V maxHose Length:35–39 in with 3-jaw couplerGrease Capacity:14 oz cartridge / bulk fill
Typical price range$77.99 – $302.99

At a glance

Category
Power Tools
Data updated
Nov 20, 2026

Current offers

Highlights

  • Pressure ratings separate true capability: 6,000–8,000 PSI handles automotive chassis and light machinery, while 10,000–20,000 PSI is required for heavy equipment and cold-weather grease.
  • Battery platform compatibility is the hidden cost: 18V Makita-compatible and 20V max systems use different slide-on footprints, so a tool-only gun locks you into one brand's batteries and charger.
  • Hose length and coupler quality dictate access: 35–39 inch hoses reach awkward fittings, but a 3-jaw hardened coupler and inline pressure relief valve prevent grease lock and hose burst.
  • Duty cycle and cartridge format matter: guns that accept both 14 oz cartridges and bulk fill with a bleed valve avoid air pockets, while plastic-bodied models suit occasional use and metal gear housings survive daily shop duty.

Best use cases

  • Best fit for auto shops and fleet maintenance: choose a 20V kit with two batteries, 10,000 PSI, and a 39-inch hose for daily chassis and bearing work; skip 8,000 PSI tool-only units that stall on seized fittings.
  • Best fit for heavy equipment and cold climates: pick a 20,000 PSI gun with a 4.0Ah battery and quick charger to push thick EP-2 grease through long lines; a 6,000–8,000 PSI plastic-body gun will stall and overheat.
  • Best fit for home garage and occasional use: an 18V Makita-compatible tool-only gun at 8,000 PSI with a 35-inch hose saves money if you already own Makita batteries; skip bundled kits with unknown cells.
  • Wrong fit for precision or low-pressure lubrication: do not use a 10,000+ PSI gun on sealed bearings or small zerks rated below 3,000 PSI—use a manual gun or lower-pressure electric model to avoid seal damage.

Buying tips

  • Match battery voltage and footprint to your existing platform: 18V Makita-compatible uses a slide-on shoe, while 20V max tools often use a different slide—buy the bare tool only if you own the exact battery series.
  • Require a minimum 8,000 PSI rating for automotive and 10,000+ PSI for heavy equipment; pressure below 6,000 PSI cannot clear cold grease or clogged fittings.
  • Check cartridge compatibility: a gun that accepts 14 oz cartridges plus bulk fill with a follower rod and bleed valve avoids air-lock and wasted grease.
  • Insist on a 3-jaw hardened coupler and a pressure relief valve; plastic couplers strip under 8,000+ PSI, and a relief valve prevents hose burst when the fitting is blocked.

Specs

Max Pressure6,000–20,000 PSI
Battery Platform18V Makita-compatible / 20V max
Hose Length35–39 in with 3-jaw coupler
Grease Capacity14 oz cartridge / bulk fill

Related searches

What to check before buying

  • Confirm your battery platform: measure the slide footprint and voltage of your existing 18V or 20V batteries before buying a tool-only gun.
  • Verify the grease fitting type and pressure rating on your equipment—standard zerks accept 8,000–10,000 PSI, but sealed bearings may be rated lower.
  • Check hose length and coupler reach: 35–39 inches covers most chassis and equipment fittings; a 90-degree adapter may be needed for tight spaces.
  • Confirm the gun accepts your grease format: 14 oz cartridges, bulk fill, or both, and that a bleed valve is present to purge air.

FAQ

All Power Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.