DIY Tool Picks

Craftsman Drill Bit Set Buying Guide

Craftsman drill bit sets are available in two distinct tiers: legacy USA-made bits and modern imported sets, with the key trade-off being high-speed steel (HSS) versus cobalt or titanium coatings for wear resistance. The decision rule is simple: buy cobalt or titanium-coated HSS for drilling metal or repeated use, and avoid carbon steel sets for anything beyond occasional softwood.

Material Grade:HSS / Cobalt (M35) / TiN-coatedShank Type:Round / 1/4-in HexPoint Angle:118° (wood) / 135° split (metal)Size Range:1/16–1/2 in, 1/64 increments

At a glance

Price range
Price range not synced yet
Category
Power Tools
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Craftsman's modern bit sets are predominantly imported; older USA-made sets are identified by 'Made in USA' stamping on the shank and typically use M2 HSS.
  • Cobalt (M35) bits retain hardness at higher temperatures and last 3–5x longer in stainless steel than standard HSS, but are brittle and snap under lateral load.
  • Titanium nitride (TiN) coating adds surface lubricity and extends life in wood and mild steel, but is only a coating—once worn through, the bit dulls like uncoated HSS.
  • Craftsman's black oxide bits are bare HSS with a corrosion-resistant finish; they are the baseline for general-purpose drilling in wood, plastic, and soft metal.

Best use cases

  • Best fit: Homeowners drilling occasional holes in pine, drywall, and plastic—a 20–30 piece titanium-coated HSS set covers 90% of tasks and stays sharp through weekend projects.
  • Best fit: Metalworkers or contractors drilling stainless steel or repeated holes in steel plate—choose a cobalt set (M35) in the 1/16–1/2 inch range with a 135-degree split point for self-centering.
  • Wrong fit: Buying a 300-piece mega-set for furniture assembly—most bits are duplicate sizes you will never use; instead buy a 15-piece set of the exact sizes your anchors and screws require.
  • Wrong fit: Using carbon steel (black) bits in hardwood or metal—they overheat and dull in minutes; reserve them for softwood only if you already own them.

Buying tips

  • Match the shank type to your drill: 1/4-inch hex shanks fit quick-change impact drivers, while round shanks require a keyed or keyless chuck; Craftsman sets specify one or the other.
  • For metal drilling, insist on a 135-degree split point—it prevents walking on curved surfaces and is standard on Craftsman cobalt and titanium sets; 118-degree points are for wood only.
  • Check the size progression: a quality set includes every 1/64 inch from 1/16 to 1/4 inch; skipping sizes (e.g., only even 32nds) forces you to buy singles later.
  • Craftsman's 'Drill Bit Set' branding covers both jobber-length (standard 4–6 inch) and mechanics-length (shorter) bits; jobber length is the versatile default for home and shop.

Specs

Material GradeHSS / Cobalt (M35) / TiN-coated
Shank TypeRound / 1/4-in Hex
Point Angle118° (wood) / 135° split (metal)
Size Range1/16–1/2 in, 1/64 increments

Related searches

What to check before buying

  • Measure your drill chuck's maximum capacity: most 3/8-inch chucks accept up to 3/8-inch shanks; 1/2-inch chucks are needed for larger bits in bigger sets.
  • Confirm your drill's drive type: impact drivers require 1/4-inch hex shank bits; standard drills take round shanks—mixing them strips the bit or chuck.
  • Check the storage case footprint against your toolbox drawer; metal index cases are more durable but larger than plastic fold-outs.
  • Verify the bit material grade on the shank or case: HSS, cobalt (M35), or TiN coating—avoid sets labeled only 'high carbon steel' for metalwork.

FAQ

All Power Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.