Dewalt Cordless Chainsaw Buying Guide
A DeWalt cordless chainsaw is a battery-powered cutting tool built around the 20V MAX or 60V MAX FlexVolt platform, where the primary trade-off is voltage class versus bar length and cutting throughput—higher voltage delivers more sustained torque for larger limbs, while lower voltage keeps weight and cost down for light pruning. The decision rule is simple: choose a 20V MAX model for branches under 8 inches and occasional yard cleanup, and step up to 60V MAX for felling small trees, storm cleanup, and continuous cutting where motor stall and battery sag separate serious tools from compromises.
At a glance
- Price range
- Price range not synced yet
- Category
- Power Tools
- Data updated
- Nov 20, 2026
Current offers
Highlights
- DeWalt splits its cordless chainsaw line by voltage: 20V MAX models (DCCS620) run a 12-inch bar with a brushed motor for light pruning, while 60V MAX FlexVolt models (DCCS670, DCCS672) use brushless motors and 16- to 20-inch bars for sustained cutting.
- FlexVolt batteries automatically switch between 20V and 60V output depending on the tool, so a 60V chainsaw can share packs with 20V drills—but only FlexVolt packs deliver the full 60V; standard 20V MAX packs will not run 60V tools.
- Bar-and-chain gauge matters: DeWalt saws use standard 3/8-inch low-profile pitch with 0.043- or 0.050-inch gauge chain, so replacement chains and bars are widely available from Oregon and DeWalt—avoid oddball proprietary sizes.
- Brushless motors in 60V models produce roughly 2-3x the torque of brushed 20V units and run cooler under load, which directly extends run time per charge and tool life in continuous storm cleanup.
Best use cases
- Pick a 20V MAX 12-inch saw (DCCS620) for pruning limbs up to 6-8 inches and light storm cleanup around a suburban yard—it is lighter and cheaper, and standard 20V packs you already own will run it.
- Choose a 60V MAX 16- or 20-inch saw (DCCS670/DCCS672) for felling small trees up to 14-16 inches diameter, bucking firewood, or all-day storm work where a brushed 20V saw will stall and overheat.
- Skip both for daily professional logging or large-diameter hardwoods—no battery chainsaw in this class matches a gas or corded 15-amp saw for sustained torque, and you should rent or buy gas for that workload.
- Do not buy a 60V saw if you own only standard 20V MAX batteries—you must add FlexVolt packs and a FlexVolt charger, which changes the total platform cost significantly.
Buying tips
- Match bar length to the wood: a 12-inch bar cuts limbs up to about 10 inches safely, a 16-inch bar handles 12-14 inch logs, and a 20-inch bar is the minimum for felling 14-16 inch trees—never force a short bar into larger wood.
- Buy bare-tool only if you already own compatible batteries: 20V saws run on any 20V MAX pack (5.0Ah or larger recommended for runtime), but 60V saws require FlexVolt packs—DCB606 6.0Ah or larger for meaningful run time.
- Check chain pitch and gauge before buying replacement chain: DeWalt 20V and 60V saws use 3/8-inch low-profile pitch, and using the wrong gauge (0.043 vs 0.050) will damage the bar and sprocket.
- Prefer brushless 60V models over brushed 20V for any cutting session longer than 15-20 minutes—brushed motors lose efficiency and heat up, cutting run time per charge by roughly half under continuous load.
Specs
| Platform Voltage | 20V MAX vs 60V MAX FlexVolt |
|---|---|
| Motor Type | Brushed (20V) vs Brushless (60V) |
| Bar Length | 12 in (20V) to 16-20 in (60V) |
| Chain Pitch/Gauge | 3/8 in low-profile, 0.043-0.050 in |
Related searches
What to check before buying
- Confirm your battery platform: count how many 20V MAX packs you own and whether any are FlexVolt—if none are FlexVolt, budget for at least one 6.0Ah FlexVolt pack and charger with a 60V saw.
- Measure the largest diameter wood you cut regularly: if it exceeds 8 inches, a 12-inch 20V saw will bog down; step up to a 16-inch 60V model.
- Verify bar-and-chain availability locally or online for the exact pitch/gauge—3/8-inch low-profile is standard, but confirm your model's gauge before buying spare chains.
- Check the saw's oil tank capacity and automatic oiler: smaller 20V saws hold around 4-6 oz, which is enough for light pruning but requires refills during extended cutting; larger 60V saws hold more.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
