Photos from current listings. Actual item, color, and included accessories may vary.
Dewalt Cordless Grinder Buying Guide
A DeWalt cordless grinder is a battery-powered angle grinder built around the 20V MAX (18V nominal) slide-pack platform, with brushed and brushless tiers that directly govern runtime, heat, and service life. The core trade-off is motor architecture and battery class: brushed motors cost less but run hotter and wear faster, while brushless motors deliver more cuts per charge and survive sustained load. The decision rule is simple: buy brushless with a 5.0Ah-or-higher pack for continuous metalwork; buy brushed with a compact 4.0Ah pack only for light, intermittent cutting and grinding.
At a glance
- Category
- Power Tools
- Data updated
- Nov 20, 2026
Current offers
Highlights
- 20V MAX platform uses 18V nominal slide packs; the same battery fits drills, impacts, and grinders across the line, so battery investment carries across tools.
- Brushless motors (DCG413/DCG415 class) run cooler and deliver roughly 30-50% more runtime per charge than brushed DCG412-class motors under the same load.
- 4-1/2 in (115 mm) and 5 in (125 mm) wheels share the same M14 spindle; 5 in models clear deeper cuts and accept more disc types, while 4-1/2 in stays lighter.
- Tool-free guard and spindle lock with a 5/8-11 or M14 arbor determine disc compatibility; brake-equipped models stop the wheel in about 1-2 seconds versus 3-5 seconds without.
Best use cases
- Pick a brushless 4-1/2 in or 5 in model plus a 5.0Ah+ pack for welding cleanup, rebar cutting, and rust removal; skip brushed kits if you grind more than a few minutes at a time.
- Pick a brushed 4-1/2 in kit with a 4.0Ah pack for occasional DIY jobs like cutting bolts or sharpening blades; skip it for all-day fabrication where heat and runtime matter.
- Pick a 5 in model with a brake and tool-free guard for maximum disc variety and safety in a mixed metal/ masonry workflow; skip the brake only if you never need fast stop between cuts.
- Skip any bundle that pairs a grinder with a 2.0Ah compact pack for grinding; that pack is for drills and impacts, not sustained high-draw cutting.
Buying tips
- Match wheel size to the job: 4-1/2 in (115 mm) covers most cuts at lower weight; 5 in (125 mm) gives about 10% more cut depth and accepts more disc profiles on the same M14 spindle.
- Buy brushless if you expect more than about 10 minutes of continuous grinding per session; brushed motors heat-soak and slow under sustained load.
- Choose a 5.0Ah or 6.0Ah pack for grinding and cutting; a 2.0Ah pack is a drill/impact pack and will hit thermal cutoff in a grinder.
- Confirm the arbor: 5/8-11 in is the North American standard for 4-1/2 in and 5 in discs, while M14 is the metric equivalent; buying the wrong nut/arbor adapter blocks disc mounting.
Specs
| Motor Type | Brushless vs Brushed |
|---|---|
| Wheel Size | 4-1/2 in (115 mm) vs 5 in (125 mm) |
| Battery Platform | 20V MAX slide pack (18V nominal) |
| Arbor / Spindle | 5/8-11 in or M14 |
Related searches
What to check before buying
- Confirm your existing DeWalt batteries are 20V MAX slide packs, not 12V MAX or FlexVolt-only; only 20V MAX slide packs fit the grinder shoe.
- Measure your work: a 4-1/2 in wheel cuts to about 1-1/4 in depth of cut, so choose 5 in if you routinely cut thicker stock.
- Check your power source: a 20V MAX charger is required for 20V packs, and a fast charger cuts pack swap downtime on multi-battery jobs.
- Verify disc arbor and guard: the tool ships with a guard sized to its wheel, and 5/8-11 vs M14 nuts are not interchangeable without an adapter.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.

