DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Dewalt Drill Buying Guide

DeWalt drills are cordless power tools defined by their 20V MAX battery platform and brushless motor generations, where the main trade-off is bare-tool vs kit and drill/driver vs hammer drill capability. The clear decision rule: buy a brushless 20V MAX model with a metal ratcheting chuck for sustained torque and runtime, and skip outdated brushed or NiCad-era tools unless budget is the absolute constraint.

Motor Type:Brushless vs BrushedBattery Platform:20V MAX Li-ion slide-onChuck Size:1/2 in metal ratchetingTool Format:Drill/driver vs hammer drill
Typical price range$35.49 – $273.99

At a glance

Category
Power Tools
Data updated
Nov 20, 2026

Current offers

Highlights

  • 20V MAX Li-ion batteries share one slide-on interface across the line, so bare tools (DCD805, DCD800) reuse existing packs and chargers.
  • Brushless motors in DCD800/DCD805 deliver longer runtime per charge and roughly 30-50% more torque than brushed DCD771-class drills.
  • DCD805 adds a hammer mode with two mechanical speeds and a 1/2-inch metal ratcheting chuck; DCD800 is drill/driver only.
  • Kit vs bare tool matters: kits include batteries and charger, while bare tools assume you already own the 20V MAX ecosystem.

Best use cases

  • Best fit: DCD805 hammer drill kit for homeowners drilling into brick, block, and concrete plus wood/metal tasks. Skip if you only drill wood/drywall.
  • Best fit: DCD800 or DCD805 bare tool for buyers already on the 20V MAX battery platform who want a compact brushless drill without duplicate chargers.
  • Wrong fit: 18V NiCad or older brushed models for daily production work—runtime and torque fade under sustained load. Choose brushless 20V MAX instead.
  • Wrong fit: impact drivers for drilling holes—they lack a chuck and clutch. Pair a drill/driver with a separate impact driver for fastening.

Buying tips

  • Choose brushless over brushed: brushless models (DCD800/DCD805) run cooler and deliver more torque per amp-hour, extending battery life.
  • Match chuck and clutch: 1/2-inch metal ratcheting chuck for bits up to 1/2-inch shank; 15-position clutch prevents overdriving screws.
  • Bare tool vs kit: buy bare only if you own 20V MAX batteries and a charger; otherwise a kit is the complete, compatible package.
  • For masonry, pick the hammer drill (DCD805) with hammer mode; standard drill/drivers stall in brick and concrete.

Specs

Motor TypeBrushless vs Brushed
Battery Platform20V MAX Li-ion slide-on
Chuck Size1/2 in metal ratcheting
Tool FormatDrill/driver vs hammer drill

Related searches

What to check before buying

  • Confirm you own or plan to buy 20V MAX Li-ion batteries and a charger if selecting a bare tool.
  • Measure your bit shank sizes: a 1/2-inch chuck covers most bits, but 3/8-inch chucks limit larger auger and hole-saw shanks.
  • For hammer drilling, verify masonry bit sets with carbide tips and the correct ANSI shank type for your wall material.
  • Check the tool's clutch and speed range against your tasks: two-speed gearboxes suit drilling vs driving, single-speed limits control.

FAQ

All Power Tools buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.