Photos from current listings. Actual item, color, and included accessories may vary.
Jack Hammer Buying Guide
Jack hammers are heavy-duty demolition tools that deliver high-impact blows to break concrete, asphalt, and masonry, available as corded electric or pneumatic units. The primary trade-off is impact energy versus weight and power source: electric models offer plug-and-play convenience but need high-amperage circuits, while pneumatic units demand a large compressor yet deliver relentless duty cycles. Decide by matching the tool's impact energy (joules) and beats-per-minute to your material thickness and runtime needs—skip underpowered 1500W-class units for sustained slab work.
At a glance
- Category
- Power Tools
- Data updated
- Nov 20, 2026
Current offers
VEVOR Demolition Jack Hammer, 2200W 1400 BPM Concrete Breaker, Heavy Duty Electric 6pcs Chisels Bit With Gloves, Swiveling Front Handle For Trenching And Breaking Holes$217.99
View on Mallflare
Demolition Jack Hammer 2200 W 1950 BPM Concrete Breaker 6pcs Chisels, For Trenching and Hole Breaking, 360° Swiveling Front Handle, Heavy Duty Electric with Gloves, Carrying Case$221.99
View on Mallflare
Highlights
- Electric demolition hammers split into 1500–1800W light-duty and 2000–2400W heavy-duty classes; the 2200W class delivers roughly 40–60 joules per blow for medium concrete.
- Beats per minute (BPM) ranges from 1300 to 1950; higher BPM suits brittle masonry, while higher impact energy per blow is better for reinforced concrete.
- Pneumatic jack hammers require a compressor delivering 90–120 CFM at 90 PSI; electric units need a dedicated 20A circuit and 12-gauge extension cords.
- Hex shank sizes (11mm, 17mm, 28mm) and SDS-max vs. hex chucks determine bit compatibility—28mm hex is standard for heavy demolition hammers.
Best use cases
- Best fit for electric: residential slab removal, trenching, and tile demolition where a 2200W corded unit with swiveling handle provides mobility and sufficient power. Skip pneumatic unless you already own a 5+ HP compressor.
- Best fit for pneumatic: continuous concrete breaking on job sites with a towable compressor; choose a 60–90 lb class hammer for horizontal work. Skip for overhead or vertical work where weight causes fatigue.
- Best fit for light-duty 1500–1800W: occasional brick and mortar removal, small patio work. Skip for reinforced concrete or all-day use—the lower impact energy will stall and overheat.
- Wrong fit: renting-heavy DIYers buying a 2200W electric hammer for a one-time 4-inch slab—rental or a smaller SDS-max rotary hammer is more economical and easier to handle.
Buying tips
- Match impact energy to concrete strength: 40–60 J handles 4–6 inch unreinforced slabs; reinforced or thicker concrete needs 60+ J and a 28mm hex shank.
- For electric models, confirm a 20A dedicated circuit; most 2200W units draw 18–19A at full load and will trip 15A breakers. Use 12/3 extension cords under 50 ft.
- Pneumatic hammers: size the compressor at 1.5× the hammer's CFM rating to avoid pressure drop—a 90 CFM hammer needs a 135 CFM compressor for continuous duty.
- Check chuck type: SDS-max for rotary hammers, 28mm hex for demolition hammers, 11mm hex for light chisels. Ensure at least 2–3 chisel bits are included or budget for them.
Specs
| Power Source | Corded electric vs pneumatic |
|---|---|
| Impact Energy | 20–60+ J (electric); 30–70 J (pneumatic) |
| Blows Per Minute | 1300–1950 BPM |
| Chuck Type | SDS-max / 28mm hex / 11mm hex |
Related searches
What to check before buying
- Measure the slab thickness and reinforcement: over 6 inches or rebar requires a 60+ J hammer and possibly a pneumatic unit.
- Verify power: a 2200W electric hammer needs a 20A circuit; check your panel and outlet distance before buying.
- For pneumatic, confirm compressor output (CFM at 90 PSI) meets or exceeds the hammer's requirement plus 50% headroom.
- Confirm bit compatibility: 28mm hex is standard for heavy electric demolition hammers; SDS-max for rotary hammers. Ensure chisels are available locally.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.