Photos from current listings. Actual item, color, and included accessories may vary.
Milwaukee Cordless Ratchet Buying Guide
Milwaukee cordless ratchets are compact 12V battery-powered tools that deliver controlled torque in tight spaces where air ratchets and hand ratchets struggle. The core trade-off is brushed vs. brushless motor and standard vs. high-speed gearing: brushed models (2457) are affordable and proven but slower and less efficient, while FUEL brushless models (2557, 2567) add power, runtime, and speed at a higher cost. The decision rule: buy FUEL brushless for daily professional use; choose brushed only for occasional DIY work where cycle time is not critical.
At a glance
- Category
- Power Tools
- Data updated
- Nov 20, 2026
Current offers
Milwaukee M12 3/8 in Cordless Ratchet 2457-20 Tool-Only Red/Black$68.84View on eBay
Milwaukee 2457-20 M12 12V 3/8" Inch Cordless Ratchet (Tool Only)$79.88View on eBay
Milwaukee 2457-20 M12 12V 3/8" Inch Cordless Ratchet (Tool Only)$85.99View on eBay
New Milwaukee Fuel 2567-20 M12 12V 12 Volt High Speed 3/8” Cordless Ratchet$129.49View on eBay
Milwaukee M12 FUEL 2567-20 12-Volt Cordless High Speed 3/8 in Ratchet Bare Tool$130.99View on eBay
Highlights
- M12 2457-20 uses a brushed motor and 3/8 in anvil with 35 ft-lbs max torque and 250 RPM — the baseline standard-speed ratchet.
- M12 FUEL 2557-20 is brushless, 3/8 in, 55 ft-lbs, 200 RPM, with a variable-speed trigger and LED for controlled low-speed fastening.
- M12 FUEL 2567-20 High Speed is brushless, 3/8 in, 55 ft-lbs, 450 RPM — roughly double the speed for rapid nut-running and assembly work.
- All M12 ratchets share the same 12V battery platform, so chargers and packs are cross-compatible across the line; tool-only kits ship without battery or charger.
Best use cases
- Best fit: automotive and equipment mechanics doing repetitive fastener work — choose the 2567-20 High Speed for the fastest cycle times, or 2557-20 for general repair.
- Best fit: tight-space assembly and under-dash/engine-bay work — the compact head and 3/8 in anvil fit where impact wrenches cannot; pair with a 2.0Ah or 4.0Ah M12 pack for balance.
- Wrong fit: heavy suspension or lug-nut removal — a 55 ft-lb ratchet cannot break high-torque fasteners; use a high-torque impact wrench instead.
- Wrong fit: budget one-off jobs — the brushed 2457-20 is adequate for occasional use, but if you already own M12 tools, stepping to FUEL brushless gives far better runtime and durability.
Buying tips
- Choose 3/8 in anvil for the widest socket compatibility; 1/4 in versions exist for lighter work but limit torque and socket range.
- Buy FUEL brushless (2557/2567) if you use the tool weekly or professionally — brushed motors wear faster and deliver less torque per charge.
- Select High Speed (2567) when speed matters for running nuts; select standard FUEL (2557) when you need smoother low-speed control.
- Tool-only listings require an M12 battery and charger — factor in a 2.0Ah–4.0Ah pack if you are not already on the M12 platform.
Specs
| Motor Type | Brushed vs Brushless FUEL |
|---|---|
| Drive Size | 3/8 in (1/4 in also available) |
| Max Torque | 35–55 ft-lbs |
| Speed Tier | Standard 200–250 RPM / High 450 RPM |
Related searches
What to check before buying
- Confirm you own or will buy M12 12V batteries and an M12 charger — bare-tool listings include neither.
- Verify socket drive size: 3/8 in is the standard for most automotive fasteners; ensure your socket set matches.
- Measure clearance in the work area — the ratchet head height and length determine access in tight engine bays and under dashboards.
- Check fastener torque requirements: ratchets are for running and final light tightening, not breaking loose fasteners above their rated torque.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
