Photos from current listings. Actual item, color, and included accessories may vary.
Benchtop Planer Buying Guide
A benchtop planer is a portable thicknesser that dimensionally mills boards to uniform thickness using a rotating cutterhead and powered feed rollers. The core trade-off is cutterhead architecture: two-blade HSS systems are cheapest but tear out figured grain, while spiral-style insert heads with carbide cutters deliver smoother cuts, lower noise, and replaceable edges at higher cost. Buy a spiral insert-head unit if you mill hardwood or figured stock; choose a two-blade only for softwood construction lumber and tight budgets.
At a glance
- Category
- Woodworking Saws & Planers
- Data updated
- Nov 20, 2026
Current offers
Thickness Planer, Two-Blade, 13-Inch Width Worktable Power Benchtop 1800W 23500 RPM Powerful Motor, Dual Rollers, Over Protection, Single Speed Woodworking, For Hard & Soft Wood Material$389.99
View on Mallflare
Thickness Planer, 13-Inch Width Worktable, Woodworking Power Benchtop Spiral-Style Cutterhead With 24 Inserts, 2000W 23500 RPM Powerful Motor, Single Speed, For Hard & Soft Wood Material$506.99
View on Mallflare
Highlights
- Cutterhead type is the defining tier: 2-blade HSS straight knives vs spiral-style insert heads with 24+ indexed carbide inserts.
- Spiral insert heads reduce tear-out and noise and let you rotate a damaged edge instead of replacing full knives.
- 13-inch width capacity is the benchtop standard, covering 90% of furniture and trim boards in one pass.
- Motor power spans roughly 1800W-2000W at 23500 RPM; verify amperage and dual feed rollers for consistent through-feed.
Best use cases
- Furniture and hardwood milling: pick a spiral insert-head 13-inch planer; skip two-blade units that tear out figured maple or walnut.
- Construction lumber and softwood shelving: a two-blade 13-inch planer is sufficient and cheaper; skip spiral heads only if surface finish is non-critical.
- Small shop with limited space: a benchtop 13-inch unit on a mobile stand works; skip 15-inch floor models that need 220V and permanent footprint.
- High-volume board flattening: choose a spiral head with dual rollers and 2000W motor; skip single-roller low-power units that stall on wide hardwood.
Buying tips
- Match width to your widest stock: 13-inch covers most furniture; wider boards need a 15-inch floor planer or glue-up.
- Prefer spiral insert heads with carbide inserts for hardwood; HSS straight knives dull faster and tear out figured grain.
- Check motor amperage and feed rate: 1800W-2000W with dual rollers maintains feed speed through hardwood without snipe.
- Verify cutterhead insert count: 24+ inserts give finer finish and longer service life than 12-insert heads.
Specs
| Cutterhead Type | 2-blade straight vs spiral insert |
|---|---|
| Width Capacity | 13 in (benchtop standard) |
| Motor Power | 1800W-2000W / 15A at 120V |
| Feed System | Dual powered rollers |
Related searches
What to check before buying
- Measure shop space and bench height: benchtop planers need 24-30 inches of infeed/outfeed clearance for 8-foot boards.
- Confirm electrical circuit: 1800W-2000W motors draw 15A at 120V; use a dedicated 20A circuit to avoid breaker trips.
- Plan dust collection: planers produce heavy chips; a 4-inch dust port and shop vacuum or collector are required.
- Check stock thickness range: most benchtop planers handle 1/8-inch to 6-inch thickness; verify your typical board dimensions.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.