Electric Chainsaw Buying Guide
Electric chainsaws are corded or battery-powered cutting tools defined by their power source, bar length, and chain speed—not by engine displacement. The core trade-off is between corded models' unlimited runtime and light weight versus battery models' portability and higher upfront cost. Choose corded for yard cleanup near an outlet and battery for remote pruning; avoid any saw with a plastic oil pump or sub-40cc-equivalent motor for sustained cutting.
At a glance
- Price range
- Price range not synced yet
- Category
- Woodworking Saws & Planers
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Corded saws deliver constant power but require an outdoor GFCI outlet and are limited by extension-cord voltage drop over 50 ft.
- Battery platforms differ: 18V/20V max saws suit limbs under 6 in., while 40V/60V systems handle 10-12 in. cuts without stalling.
- Bar length is not cut capacity—most saws cut 2 in. less than bar length; a 16 in. bar realistically fells 12-14 in. trunks.
- Chain speed above 30 m/s with a narrow-kerf 3/8 in. low-profile chain reduces kickback and battery draw on small saws.
Best use cases
- Best for suburban storm cleanup within 50 ft of an outlet: pick a 14-16 in. corded saw with tool-free chain tensioning and automatic oiler.
- Best for orchard pruning and trail work beyond power: pick a 40V+ battery saw with a 12-14 in. bar and at least 4.0 Ah battery for 30+ cuts per charge.
- Skip underpowered 6-8 in. pole or mini saws for felling anything over 6 in.—they stall and overheat; rent a gas saw for trunks above 16 in.
Buying tips
- Match bar length to trunk diameter: bar should exceed trunk diameter by 2 in.; a 16 in. bar cuts a 14 in. log safely.
- Check chain pitch and gauge before buying spare chains—3/8 in. low-profile (LP) is common on small saws; .325 in. is for mid-size.
- For corded saws, use a 12- or 14-gauge extension cord under 50 ft; 16-gauge cords cause voltage drop and motor overheating.
- Battery saw runtime scales with Ah: a 4.0 Ah pack delivers roughly 2x the cuts of a 2.0 Ah pack on the same saw.
Specs
| Power Source | Corded 120V vs 18V-60V battery |
|---|---|
| Bar Length | 10-20 in. (cut capacity bar minus 2 in.) |
| Chain Pitch/Gauge | 3/8 in. LP / .043-.050 in. gauge |
| Chain Speed | 20-35 m/s (electric class) |
Related searches
What to check before buying
- Measure the largest trunk you plan to cut; add 2 in. for the minimum bar length and confirm the saw's motor handles that class.
- Confirm an outdoor GFCI outlet within extension-cord reach for corded models; otherwise budget for a battery platform.
- Verify chain gauge and pitch match your spare chains or sharpening kit—mixing .043 in. and .050 in. gauge chains will not fit.
- Check bar mount pattern (A041, K095, etc.) if replacing a bar; wrong mounts prevent oiler holes from aligning.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
