Photos from current listings. Actual item, color, and included accessories may vary.
Electric Planer Buying Guide
Electric planers are handheld or benchtop machines that shave wood with rotating blades, available in corded and cordless versions. The core trade-off is between corded power and sustained depth of cut versus cordless portability and battery-platform lock-in. The decision rule: buy a corded 7-amp-class planer with a 3-1/4-inch cutterhead for heavy stock removal and benchtop use; choose an 18V brushless cordless planer only if you already own that battery platform and need mobility for trim and chamfer work.
At a glance
- Category
- Woodworking Saws & Planers
- Data updated
- Nov 20, 2026
Current offers
VEVOR Hand Planer Corded Electric Hand Planer 3-1/4" 16500 RPM Woodworking DIY$34.83View on eBay
Cordless Handheld Planer, 3-1/4-Inch Cut Width, 15000 RPM Electric Hand Wood With Brushless Motor, Adjustable Cut Depth For Woodworking, Compatible 18V Battery (Bare Tool Only)$52.99
View on Mallflare
Electric Hand Planer, 3-1/4-Inch Cut Width, 7-Amp 16800 RPM Corded Power Handheld For Wood, With Adjustable Cut Depth, 2 Blades, For Woodworking Chamfer DIY Smooth Finish Carpentry$61.99
View on Mallflare
Electric Hand Planer, 3-1/4-Inch Cut Width, 7-Amp 14500 RPM Corded Power Handheld For Wood, With Adjustable Cut Depth, 2 Blades, For Woodworking Chamfer DIY Smooth Finish Carpentry$61.99
View on Mallflare
Electric Hand Planer, 3-1/4" Width Corded 16500 RPM High-Speed Powerful Handheld Planers For Woodworking, Wood Chamfer DIY, Smooth Finish Carpentry Tool, FCC-SDoC$67.99
View on Mallflare
Cordless Handheld Planer, 2-1/5-Inch Cut Width, 14500 RPM Electric Hand Wood With 2 Ah 12V Lithium Battery, Brushless Motor, Adjustable Cut Depth, 2 Blades, For Woodworking Chamfer$81.99
View on Mallflare
Cordless Handheld Planer, 3-1/4-Inch Cut Width, 15000 RPM Electric Hand Wood With 4.0 Ah 18V Lithium Battery, Brushless Motor, Adjustable Cut Depth, Dust Collection Bag, For Woodworking$118.99
View on Mallflare
Highlights
- Corded models deliver 7-amp-class power at 14,500-16,800 RPM with continuous run time; cordless brushless units run 15,000 RPM but depend on 12V-18V battery capacity and voltage.
- Cutterhead width splits into 3-1/4-inch (82 mm) standard and 2-1/5-inch (56 mm) compact classes; the 3-1/4-inch class matches most door-trimming and edge-jointing tasks.
- Cut depth is set by a front shoe knob, typically 0-1/16 inch per pass with a rebate depth up to 1/8 inch; two reversible carbide or HSS blades are the norm, with some models accepting a chamfer groove.
- Dust collection is either a blower-assisted bag or a straight chute; bag-equipped models reduce chip scatter but add bulk, while bare-tool cordless units need a separate vacuum or bag.
Best use cases
- Best fit: corded 7-amp 3-1/4-inch planer for door bottom trimming, edge jointing, and sustained stock removal on a bench or jobsite with outlet access; skip cordless if you need continuous high-load cuts.
- Best fit: 18V brushless 3-1/4-inch cordless planer with 4.0 Ah battery and dust bag for trim carpentry and chamfering where mobility matters; skip 12V compact models for heavy door work.
- Best fit: 2-1/5-inch compact cordless planer for one-handed chamfering, small edge work, and overhead reach; skip it for wide-face flattening or deep rebates where the 3-1/4-inch class is required.
Buying tips
- Match cutterhead width to the task: 3-1/4 inches (82 mm) covers door edges and most joinery; 2-1/5 inches (56 mm) is for trim and chamfer work only.
- Choose corded 7-amp power for continuous stock removal and cordless brushless 18V for mobility; a 12V 2 Ah battery is a light-duty compromise, not a heavy-use substitute.
- Confirm blade type and replacement: reversible carbide or HSS blades with two edges per blade extend life; models with indexed disposable blades avoid sharpening downtime.
- Check the battery platform before buying a bare tool: an 18V bare-tool planer only makes sense if you already own compatible batteries and a charger.
Specs
| Power Source | Corded 7-amp vs 18V brushless cordless |
|---|---|
| Cutterhead Width | 3-1/4 in (82 mm) vs 2-1/5 in (56 mm) |
| No-Load Speed | 14,500-16,800 RPM |
| Cut Depth per Pass | 0-1/16 in; rebate up to 1/8 in |
Related searches
What to check before buying
- Measure the widest board or door edge you plan to plane; buy a 3-1/4-inch cutterhead if any cut exceeds 2-1/5 inches.
- Confirm you have a 120V outlet and a 15-amp circuit for corded 7-amp models, or existing 18V batteries and charger for cordless bare tools.
- Check dust management: a bag or shop-vac adapter is needed for indoor work, and bare-tool cordless units ship without a bag.
- Verify the depth-of-cut range (typically 0-1/16 inch per pass) and rebate depth (up to 1/8 inch) against your door-trimming or jointing needs.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.