DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Planer Buying Guide

A planer is either a handheld power tool for chamfering, scribing, and trimming edges or a benchtop thickness planer for dimensioning boards to uniform thickness. The primary trade-off is cut width and motor type versus portability and dust control: handhelds run 2-1/5-inch to 3-1/4-inch widths with brushed or brushless motors, while benchtop units deliver 12-13-inch widths with dual feed rollers and 15-amp-class motors. Buy handheld if you trim installed work; buy benchtop if you mill rough lumber to thickness.

Planer Type:Handheld vs benchtop thicknessCut Width:2-1/5 in / 3-1/4 in / 13 inMotor Type:Brushed corded vs brushlessPower Class:7A corded / 18V cordless / 15A bench
Typical price range$23.48 – $506.99

At a glance

Category
Woodworking Saws & Planers
Data updated
Nov 20, 2026

Current offers

Highlights

  • Handheld planers split into 3-1/4-inch (82mm) and 2-1/5-inch (56mm) cut widths; 3-1/4-inch is the standard for door trimming and joist scribing, while 2-1/5-inch suits light chamfering only.
  • Brushless motors on cordless handhelds deliver roughly 15,000 RPM with longer runtime and no brush replacement; brushed corded units run 14,500-16,800 RPM at 7 amps and cost less but wear brushes.
  • Benchtop thickness planers use two-blade cutterheads on a 13-inch width with dual rollers and a 15-amp/1800W-class motor turning 23,500 RPM single-speed for hard and soft wood.
  • Cordless handhelds are sold bare tool (18V battery platform) or with 12V 2.0Ah / 18V 4.0Ah batteries; the 12V class cuts 2-1/5 inch and the 18V class cuts 3-1/4 inch with a dust bag.

Best use cases

  • Buy a 3-1/4-inch corded 7-amp handheld planer if you trim doors, scribe cabinets, or chamfer installed lumber and have mains power on site.
  • Buy an 18V brushless 3-1/4-inch bare-tool handheld if you already own that battery platform and need cordless door trimming with a dust bag.
  • Buy a 13-inch two-blade benchtop thickness planer if you dimension rough-sawn boards to consistent thickness and have a bench plus 4-inch dust collection.
  • Skip the 2-1/5-inch 12V cordless for door work—its narrow cut and 2.0Ah battery suit only light chamfering and small trim.

Buying tips

  • Match cut width to task: 3-1/4 inch covers standard 1-3/4-inch door edges plus chamfer; 2-1/5 inch is for light trim only.
  • Choose brushless for cordless runtime and brush-free life; choose corded brushed 7-amp for continuous power at lower upfront cost.
  • For benchtop planers, require dual feed rollers and a two-blade cutterhead; single-roller units snipe more on board ends.
  • Cordless handhelds are bare tool or kit—confirm your battery platform's 18V interface before buying the bare tool.

Specs

Planer TypeHandheld vs benchtop thickness
Cut Width2-1/5 in / 3-1/4 in / 13 in
Motor TypeBrushed corded vs brushless
Power Class7A corded / 18V cordless / 15A bench

Related searches

What to check before buying

  • Measure the widest board or door edge you will plane; handhelds max at 3-1/4 inch, benchtops at 13 inch.
  • Confirm a 15-amp/120V circuit for benchtop planers and a 4-inch dust port match for your collector.
  • For cordless, verify your existing 18V battery slides into the bare tool and that a 4.0Ah pack is available for runtime.
  • Check bench depth and infeed/outfeed clearance for benchtop units—boards up to 13 inch wide need several feet of run-off.

FAQ

All Woodworking Saws & Planers buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.