Skill Saw Buying Guide
A skill saw (circular saw) is a handheld saw built around a spinning toothed blade, and the core trade-off is blade size and motor type: 7-1/4 in brushed motors are the framing standard, while 6-1/2 in brushless saws trade depth for portability. The decision rule is simple: buy a 15 A corded 7-1/4 in saw for stationary shop cutting, or a 20 V-class brushless 6-1/2 in saw when you need cordless freedom for sheet goods and trim.
Blade Size:7-1/4 in standard / 6-1/2 in compactMotor Type:15 A corded vs 18-20 V brushlessMax Cut Depth 90°:2-3/8 in (7-1/4) / 2-1/8 in (6-1/2)Arbor Size:5/8 in standard
At a glance
- Price range
- Price range not synced yet
- Category
- Woodworking Saws & Planers
- Data updated
- Nov 20, 2026
Current offers
Highlights
- 7-1/4 in blades cut 2-3/8 in at 90° and 1-3/4 in at 45°, enough to cross-cut 2x4s and 2x6s in a single pass at 90°.
- Corded saws use 15 A motors producing roughly 5,000-5,800 RPM; cordless brushless saws run 18-20 V batteries at 3,500-5,000 RPM with lower sustained torque under load.
- 6-1/2 in saws cut about 2-1/8 in at 90° and 1-1/2 in at 45°, covering 1x stock, plywood, and 2x4 cross-cuts at 90° but requiring a flip for deeper cuts.
- Magnesium base plates are lighter and resist bending better than stamped steel; a bevel detent at 45° plus a positive stop at 0° keeps repeated cuts square.
Best use cases
- Framing, decking, and repeated 2x lumber cross-cuts: buy a corded 15 A 7-1/4 in saw with a magnesium base and rear exhaust; skip 6-1/2 in cordless saws that stall in wet pressure-treated lumber.
- Sheet-goods breakdown and trim work on site without outlets: pick a brushless 6-1/2 in cordless saw with a 4-5 Ah battery; skip heavy 7-1/4 in corded saws if portability and one-hand control matter more than max depth.
- Finish carpentry and plywood rips where splintering matters: choose a saw with a 6-1/2 in 40-60T fine-tooth blade and a splinter guard; skip 24T framing blades that leave tear-out on veneered plywood.
- Occasional homeowner cuts of 1x and 2x stock: a 7-1/4 in corded saw with a 24T carbide blade covers nearly everything; skip 4-1/2 in mini saws limited to 1-1/2 in depth.
Buying tips
- Match blade size to depth: 7-1/4 in for 2-3/8 in at 90°; 6-1/2 in for 2-1/8 in. If you regularly cut 2x6 at 45°, only a 7-1/4 in saw clears it in one pass.
- Choose blade tooth count by material: 18-24T for framing lumber, 40-60T for plywood and finish cuts. A 24T carbide framing blade is the default all-round choice.
- Corded saws need a 15 A circuit; confirm the outlet or extension cord is 12 AWG to avoid voltage drop and motor bogging on long runs.
- Cordless saws require the same battery platform as your other tools; a 4-5 Ah pack sustains cuts better than a 2 Ah compact pack, which overheats under continuous framing use.
Specs
| Blade Size | 7-1/4 in standard / 6-1/2 in compact |
|---|---|
| Motor Type | 15 A corded vs 18-20 V brushless |
| Max Cut Depth 90° | 2-3/8 in (7-1/4) / 2-1/8 in (6-1/2) |
| Arbor Size | 5/8 in standard |
Related searches
What to check before buying
- Measure the stock you cut most often: if any cut exceeds 2-1/8 in at 90° or 1-1/2 in at 45°, step up to a 7-1/4 in saw.
- Confirm your battery platform voltage and connector type before buying a bare cordless saw; batteries are not cross-compatible between brands.
- Check that the saw accepts a standard 5/8 in arbor blade and has a usable dust port or rear exhaust direction for your work area.
- Verify the base plate material (magnesium vs stamped steel) and that the bevel lever locks at 45° without deflection for accurate repeated cuts.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
