DIY Tool Picks

Cabinet Door Hardware Template Buying Guide

A cabinet door hardware template is a drilling jig that locates knob, pull, and hinge-boring positions consistently across a run of doors and drawer fronts. The primary trade-off is between fixed-pitch steel jigs that lock you to one screw spacing and adjustable aluminum or polymer jigs that cover multiple spacings but can drift if the fence is weak. The decision rule: for a full kitchen or vanity set, buy an adjustable steel or anodized-aluminum template with a positive stop and hardened bushings; for a single door or one-off repair, a fixed acrylic or stamped-steel template at the exact pitch is sufficient.

Template Type:Knob / Pull / Hinge-boring / ComboPull Hole Centers:3, 3-1/2, 4, 5 in (76-128 mm)Bushing Material:Hardened steel vs bare plasticHinge Cup Bore:35 mm cup, 1/2 in depth stop

At a glance

Price range
Price range not synced yet
Category
Woodworking Clamps, Jigs & Joinery
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Knob templates center a single hole at a fixed offset from the door edge (commonly 2-1/2 to 3 in); pull templates drill two holes at standard centers such as 3, 3-1/2, 4, or 5 in (76, 89, 102, 128 mm).
  • Hardened steel drill bushings (typically 1/4 to 5/16 in ID) keep the bit from walking in hardwood; unlined plastic or acrylic holes oval out after a few dozen doors.
  • Adjustable jigs index the fence to the door edge with a thumbscrew; a machined or extruded aluminum fence with a full-length lip holds register better than a single-point pin.
  • Hinge-boring templates use 35 mm cup bores with 1-3/8 in (35 mm) depth stops and centerlines of 3, 4, 4-1/2, or 5 in from the door edge; Euro hinge patterns need the cup centerline and screw-pattern spacing to match the hinge brand.

Best use cases

  • Full kitchen or bath cabinet run (10+ doors): buy an adjustable steel or anodized-aluminum template with hardened bushings and a full-length fence; skip fixed acrylic single-pitch jigs that cannot handle mixed drawer-front and door layouts.
  • Mixed hardware families (knobs on doors, bar pulls on drawers): choose a reversible or two-plate template covering 3 to 5 in pull centers plus a single knob hole; a dedicated one-pattern jig forces a second purchase.
  • One-off replacement door or furniture flip: a fixed steel or acrylic template at the exact existing screw pitch is enough; do not pay for an adjustable multi-pitch jig you will use once.
  • Euro-style concealed hinges (35 mm cup): use a dedicated hinge-boring template with depth stop and the matching screw pattern; a knob/pull template will not locate cup bores or hinge plates.

Buying tips

  • Match the template to your actual screw pitch before buying: measure center-to-center on the existing pull or the hardware spec (3, 3-1/2, 4, 5 in / 76, 89, 102, 128 mm) and confirm the jig lists that spacing.
  • For 35 mm Euro hinges, confirm the template's cup bore is 35 mm with a depth stop near 1/2 in (12-13 mm) and that the screw-hole pattern matches your hinge brand (Blum, Grass, Hettich, Salice differ).
  • Prefer hardened steel bushings over bare plastic holes; a 1/4 in bushing for #8 screws and 5/16 in for larger pulls prevents bit wander in oak and maple.
  • Check fence registration: a full-length aluminum fence or self-centering V-base holds the edge; a single thumbscrew pin can rotate and throw hole spacing off across a run.

Specs

Template TypeKnob / Pull / Hinge-boring / Combo
Pull Hole Centers3, 3-1/2, 4, 5 in (76-128 mm)
Bushing MaterialHardened steel vs bare plastic
Hinge Cup Bore35 mm cup, 1/2 in depth stop

Related searches

What to check before buying

  • Measure door thickness (typically 3/4 in / 19 mm) and confirm the template's fence or clamp opens to that thickness without rocking.
  • Confirm the drill bit diameter matches your hardware screws (#8 = 9/64 to 5/32 in; #10 = 5/32 to 11/64 in) and that the bushing accepts that bit shank.
  • For hinge cups, verify door overlay and hinge cup centerline (3 to 5 in from edge) against your hinge model before drilling.
  • Check that the template registers off the door's hinge-side or handle-side edge consistently and that left/right doors are accounted for (mirror or flip the jig).

FAQ

All Woodworking Clamps, Jigs & Joinery buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.