Cabinet Handle Template Buying Guide
A cabinet handle template is a drilling jig that guarantees consistent hole spacing and alignment for drawer pulls and door knobs across an entire kitchen or furniture run. The core trade-off is between stamped/slotted plastic guides and machined metal or self-centering jigs, which determine whether spacing stays true over dozens of holes or drifts after the first few. Buy a template rated for your exact center-to-center spacing with hardened bushings or steel drill guides if you are installing more than a handful of handles; skip thin plastic slot jigs for full-kitchen work.
At a glance
- Price range
- Price range not synced yet
- Category
- Woodworking Clamps, Jigs & Joinery
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Stamped plastic templates flex under drill pressure and enlarge their own guide holes, causing spacing drift after repeated use; machined aluminum or steel bushings hold center-to-center tolerance.
- Most cabinet pulls use standard center-to-center spacing of 3 in (76 mm), 3.5 in (89 mm), 4 in (102 mm), or 5 in (128 mm); knobs use a single hole, so a template must support both modes.
- Self-centering drill bits with spring-loaded guides are the reference standard for hinge and pull holes because they center in the jig and prevent bit walk on slick melamine.
- Adjustable templates with sliding arms or indexed pins cover multiple spacings, but each adjustment point is a potential slip source; fixed-spacing blocks are more rigid for high-volume production.
Best use cases
- Full kitchen or built-in installation with dozens of doors and drawers: choose a fixed-spacing machined template or indexed jig matched to your pull's center-to-center, plus a self-centering bit; skip slotted plastic guides.
- Occasional furniture builds or a single bathroom vanity: a reversible plastic template covering 3 in, 4 in, and knob positions is sufficient and cost-effective.
- Shop or production environment drilling hundreds of holes: invest in a drill-press-mounted or bushing-guided template system with replaceable bushings, not a handheld slot jig.
- Shaker or raised-panel doors with narrow stiles: verify the template's fence or edge reference fits the stile width; skip wide-bodied jigs that overhang the rail.
Buying tips
- Match the template's fixed spacing to the pull's center-to-center exactly — measure your existing hardware or the new pull's screw-hole distance before ordering any jig.
- Choose templates with hardened steel bushings or machined aluminum bodies for more than 20 holes; plastic slot guides are acceptable only for light, one-off use.
- Confirm the template references off the door edge or a fence rather than relying on freehand alignment; edge-referenced jigs repeat spacing across a full run.
- Use a self-centering Vix bit sized to your screw (typically 3/16 in for #8 screws) with any template to prevent walk and ensure the screw head seats flush.
Specs
| Template Material | Machined aluminum / steel vs plastic |
|---|---|
| Guide Type | Hardened bushings vs open slots |
| Spacing Modes | 3 / 3.5 / 4 / 5 in C-C + knob |
| Reference Edge | Edge fence / clamp vs freehand |
Related searches
What to check before buying
- Measure your pull's center-to-center spacing with calipers or a tape; confirm the template supports that exact value, not just a nearby nominal size.
- Check your door/drawer stile width and panel thickness so the template's fence or clamp seats fully on the face without rocking.
- Verify the template works with the drill bit diameter your screws require and that replacement bushings are available for wear.
- Confirm the template handles both horizontal drawer pulls and vertical door pulls, or that you can rotate it without losing the edge reference.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
