DIY Tool Picks

Cabinet Door Knob Template Buying Guide

A cabinet door knob template is a drilling jig that locates and guides a bit to bore perfectly aligned pull and hinge holes on cabinet doors and drawers. The core trade-off is between single-hole fixed guides, multi-hole slotted templates, and adjustable cabinet-specific jigs: fixed templates are fast and mistake-proof but limited to one bore pattern, while adjustable jigs cover more layouts at the cost of setup time. Buy a hardened, bushing-lined template sized to your standard pull centers if you want repeatable furniture-grade results; skip thin plastic or unlined guides that let the bit wander.

Template Type:Single-hole / Multi-hole / Cabinet jigBushing Material:Hardened steel / Bronze / PlasticPull Center Spacing:3 in / 3-1/2 in / 4 in / 5 inEdge Setback Range:1-1/2 to 2 in adjustable

At a glance

Price range
Price range not synced yet
Category
Woodworking Clamps, Jigs & Joinery
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Bushing material decides hole quality: hardened steel or bronze guide bushings maintain bit alignment over hundreds of holes, while bare plastic or stamped holes wear oval and drift.
  • Template geometry splits into single-hole door/drawer knob guides and multi-hole pull templates with 3-inch, 3-1/2-inch, 4-inch, or 5-inch center options and slots for variable spacing.
  • Cabinet-specific jigs (e.g., Blum, Kreg, and similar door hardware systems) combine knob, pull, and hinge cup boring in one frame, cutting repositioning errors versus separate templates.
  • Self-centering and edge-referencing fences use the door stile or edge as datum, so the bore lands at a consistent setback (typically 1-1/2 to 2 inches from the door edge) across a full kitchen run.

Best use cases

  • Full kitchen or bath refit with dozens of doors: choose an adjustable edge-referencing jig with swappable bushings for standard 3-inch to 5-inch pull centers rather than a single-hole knob template.
  • Drawer-front and slab-door knob installs only: a compact single-hole self-centering template is faster and cheaper, and prevents drift on narrow rails.
  • Shaker and raised-panel doors with narrow stiles: pick a template with a slim edge fence and confirm the bushing clears the panel profile; skip wide-frame jigs that bridge the recess.
  • Small batch or one-off furniture builds: a multi-hole slotted template with an adjustable stop bar covers knob, pull, and hinge layouts; skip dedicated single-purpose jigs that add cost without flexibility.

Buying tips

  • Match the template's center spacing to your pull's mounting-hole centers (3 inches, 3-1/2 inches, 4 inches, or 5 inches); a 3-inch template will not bore a 5-inch pull correctly.
  • Choose hardened-steel or bronze bushings sized to your bit shank (commonly 1/4-inch or 3/8-inch) to prevent wallowing; unlined plastic guides wear and cause oversized holes.
  • Verify the edge setback range: standard door knobs sit 1-1/2 to 2 inches from the door edge, so a template with an adjustable fence covering that range fits most cabinet doors.
  • For hinge cup boring, use a dedicated 35 mm hinge jig rather than a knob template; knob templates do not control cup depth or hinge pattern spacing.

Specs

Template TypeSingle-hole / Multi-hole / Cabinet jig
Bushing MaterialHardened steel / Bronze / Plastic
Pull Center Spacing3 in / 3-1/2 in / 4 in / 5 in
Edge Setback Range1-1/2 to 2 in adjustable

Related searches

What to check before buying

  • Measure your cabinet door thickness and stile width: most templates clamp doors up to 1 inch thick, and narrow Shaker stiles need a slim fence.
  • Confirm your pull's mounting-hole center distance and screw diameter before choosing a template pattern or bushing size.
  • Check your drill bit shank diameter against the template bushing; standard bushings accept 1/4-inch or 3/8-inch shanks.
  • For full overlay or inset doors, verify the template's setback range matches your hinge and pull placement plan before drilling any test holes.

FAQ

All Woodworking Clamps, Jigs & Joinery buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.