DIY Tool Picks

Cabinet Door Template Buying Guide

A cabinet door template is a reusable router jig or boring guide that defines hinge cup, handle, and pull placement across a full door run. The core trade-off is stamped/single-gauge plastic versus machined aluminum or steel with interchangeable bushings—the latter holds centerline accuracy across dozens of doors. Buy a template sized to your exact hinge cup diameter and overlay style; skip any jig that relies on adhesive tapes or has non-replaceable guide rings.

Template Material:Aluminum / Steel vs PlasticHinge Cup Bore:35mm standard / 26mm / 40mmGuide Bushing:Replaceable hardened (5-10mm)Registration:Edge-clamp / Self-centering

At a glance

Price range
Price range not synced yet
Category
Woodworking Clamps, Jigs & Joinery
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Hinge cup templates are sized to the cup diameter (typically 35mm European concealed hinges) and set the cup bore center 20-22.5mm from the door edge.
  • Aluminum or steel templates with hardened drill bushings (e.g., 5mm, 8mm, 10mm) resist wallowing and hold centerline accuracy over repeated use; acrylic or stamped templates wear at the guide hole.
  • Self-centering and indexing templates register off the door edge or an existing bore, allowing repeatable hinge placement without measuring every door.
  • Handle/pull templates typically use two or more bushings to set standard hole centers (e.g., 96mm, 128mm, 160mm) and align pulls vertically or horizontally across a set.

Best use cases

  • Pick a 35mm hinge-cup template with adjustable edge distance if you are drilling European concealed hinges on a run of overlay doors—skip fixed single-distance jigs that cannot accommodate different overlay gaps.
  • Choose a bushing-style pull template with interchangeable guide rings for mixed handle-center runs; skip one-piece plastic guides if you install more than a few doors with varying hole spacings.
  • Use a self-centering doweling jig for face-frame or inset doors where hinge side and pull side must mirror exactly; skip freehand or tape-based templates for production work.
  • A drill-press-mounted template or boring-head jig is the right fit for shop production; a handheld edge-guided template is the wrong fit for high-volume runs where drift accumulates.

Buying tips

  • Match the template's cup bore to your hinge specification: 35mm is the European concealed-hinge standard, while 26mm and 40mm cups exist for specific hinge families—measure your hinge cup, not the door.
  • Confirm the edge-distance setting range (commonly 3-6mm adjustable) matches your overlay or inset reveal; a fixed 22.5mm center distance will not suit all hinge brands.
  • Choose templates with replaceable hardened bushings; guide-hole wear is the primary failure mode, and a worn bushing shifts hole centers by fractions of a millimeter over a door run.
  • Verify the template registers on the door's reference face and edge; templates that clamp only to the face can slip on melamine or painted surfaces without a secondary edge stop.

Specs

Template MaterialAluminum / Steel vs Plastic
Hinge Cup Bore35mm standard / 26mm / 40mm
Guide BushingReplaceable hardened (5-10mm)
RegistrationEdge-clamp / Self-centering

Related searches

What to check before buying

  • Measure your door thickness and hinge cup depth: standard cabinet doors are 16-19mm thick, and some thin or thick doors require different cup depths than the template assumes.
  • Check your hinge brand's cup diameter and screw-hole pattern before buying—35mm cups are common, but screw spacing varies between Blum, Hettich, Grass, and Salice patterns.
  • Confirm the template's clamp or registration method works on your door material: edge-clamping templates may mar soft or veneered edges without a protective pad.
  • Verify the guide bushing outer diameter matches your router template guide or drill size, since a mismatched bushing-to-guide combo introduces offset error on every hole.

FAQ

All Woodworking Clamps, Jigs & Joinery buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.