DIY Tool Picks

Cabinet Drawer Pull Template Buying Guide

A cabinet drawer pull template is a drilling jig that guarantees consistent hole spacing and alignment for knobs and pulls across a full run of drawers. The core trade-off is between flimsy single-spacing plastic guides and adjustable metal jigs that lock repeatable center-to-center distances; the decision rule is simple: buy a template with metal drill bushings and a positive locking scale, skip any unmarked plastic gauge unless you only drill one drawer.

Bushing Material:Hardened steel vs bronze vs bare plasticCenter-to-Center Range:3–5 in plus 96 mm (3.78 in) EuroDrill Sizes Supported:3/16 in knobs / 1/4 in pullsReference Style:Edge fence vs self-centering

At a glance

Price range
Price range not synced yet
Category
Woodworking Clamps, Jigs & Joinery
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Drill bushings are the durability line: hardened steel or bronze bushings keep 1/4-in and 3/16-in bits from wallowing out after dozens of holes; bare plastic holes ovalize quickly.
  • Adjustable center-to-center range matters more than brand: standard pull spacings run 3 in, 3.5 in, 4 in, 5 in, and 96 mm (3.78 in) Euro spacing, so a template covering 2.5–5 in handles nearly all cabinet hardware.
  • Self-centering and edge-reference designs differ: edge-reference templates index off the drawer front edge for vertical alignment, while self-centering jigs locate off the drawer centerline for symmetric two-hole pulls.
  • Material thickness and clamp interface determine stability: 1/8-in aluminum or 3/16-in acrylic plates with integrated spring clamps or C-clamp reliefs resist bit torque far better than 1/16-in hobby plastic.

Best use cases

  • Best fit: full kitchen or bathroom cabinet refacing with 10+ drawers — choose an adjustable steel-bushing jig with a locking center-to-center scale so every pull lands at the same height and spacing.
  • Best fit: Euro-style slab drawers using 96 mm or 128 mm pulls — pick a template with metric stops or a dual-scale (inch/mm) rule rather than an inch-only gauge.
  • Wrong fit to skip: one-off furniture repair or a single drawer — a cheap fixed-spacing plastic guide or a shop-made hardboard template is sufficient; adjustable jigs are overkill.
  • Wrong fit to skip: 1-1/4-in to 1-3/8-in thick face-frame drawers where the pull screws must clear the interior box — verify screw length and bushing depth before committing to a deep-bushing jig.

Buying tips

  • Match the template's center-to-center range to your hardware: measure the pull's hole spacing (commonly 3 in, 3.5 in, 4 in, 5 in, or 96 mm) and confirm the jig's scale covers it with locked stops, not friction sliders.
  • Insist on metal drill bushings sized for 3/16-in (knobs/small pulls) and 1/4-in (standard pulls) bits; bushings should be replaceable or at least 1/4-in deep to guide the bit square.
  • Check the edge-reference fence: a square, machined fence that registers on the drawer top or side edge gives repeatable vertical placement; flimsy tabs and molded ridges drift.
  • For production runs, prefer templates with integral clamps or clear C-clamp windows; hand-holding a template invites bit walk and misaligned holes in hardwood or MDF.

Specs

Bushing MaterialHardened steel vs bronze vs bare plastic
Center-to-Center Range3–5 in plus 96 mm (3.78 in) Euro
Drill Sizes Supported3/16 in knobs / 1/4 in pulls
Reference StyleEdge fence vs self-centering

Related searches

What to check before buying

  • Measure your drawer front thickness (typically 5/8–3/4 in) and confirm the template's clamp or fence opening fits without bottoming out.
  • Record the exact hole spacing and screw diameter of your chosen pulls; the template must match both the center-to-center distance and the bushing ID.
  • Verify your drill bits: 3/16-in brad-point for knobs, 1/4-in brad-point for standard pulls; confirm the bushings accept those shank sizes.
  • Check the template's reference edge against your drawer style (slab, shaker, raised panel); a flat fence needs a flat reference surface, so raised-panel drawers may need a spacer block.

FAQ

All Woodworking Clamps, Jigs & Joinery buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.