DIY Tool Picks

Cabinet Hardware Template Buying Guide

A cabinet hardware template is a drilling guide that sets exact center-to-center spacing for pulls and knobs on doors and drawers, with quality determined by whether spacing is fixed or adjustable and whether the guide self-centers on the panel edge. Buyers face a trade-off between cheap single-spacing plastic jigs and adjustable metal templates that cover multiple hole patterns. The decision rule: choose an adjustable, self-centering metal template if you drill more than a few cabinets, and accept a fixed-spacing plastic guide only for one-off jobs with standard 3-inch or 96 mm pulls.

Adjustability:Fixed vs adjustable (64–160 mm)Centering:Self-centering fence vs single edge stopMaterial:Aluminum/steel vs molded plasticBushing Size:3/16 in (4.8 mm) / 5 mm

At a glance

Price range
Price range not synced yet
Category
Woodworking Clamps, Jigs & Joinery
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Center-to-center (CTC) spacing is the critical number: common standards are 3 in (76 mm), 96 mm, 128 mm, and 160 mm, and a template must match your pull's CTC or be adjustable across these.
  • Self-centering edge stops reference the door or drawer edge so hole pairs stay symmetric; without them, layout depends on hand measuring and is far more error-prone.
  • Adjustable templates use sliding fence or pin blocks with scale markings, while fixed templates are molded or punched for one spacing and cannot handle mixed hardware runs.
  • Metal (aluminum or steel) templates resist drill-bit wear and hold hole centers over hundreds of cycles; plastic guides can oval out at the bore with repeated use.

Best use cases

  • Full kitchen or bath remodel with mixed pull sizes: pick an adjustable self-centering template with scale marks so 96 mm, 128 mm, and 160 mm CTC pulls can all be drilled accurately.
  • Single cabinet refresh or one-off build with uniform 3-inch pulls: a fixed-spacing plastic or metal guide is sufficient and faster to set up.
  • Drawer fronts and wide doors where knob placement must align vertically: choose a template with a long fence or extendable edge reference, not a compact pull-only jig.
  • Skip adjustable templates if all your hardware is one CTC and you drill fewer than a dozen holes; the setup time outweighs the flexibility.

Buying tips

  • Measure your pull's CTC (distance between screw hole centers) before buying; a 3 in CTC pull will not fit a 96 mm template, and 96 mm (3.78 in) is not interchangeable with 3 in.
  • Choose a template whose adjustable range explicitly spans your largest and smallest CTC, typically 2.5 to 6.3 in (64 to 160 mm) for full-range models.
  • Prefer self-centering V-groove or fence-style edge stops that register on the door face and edge simultaneously; single-reference guides allow rotation error.
  • Check drill bushing size: templates bored for 3/16 in (4.8 mm) or 5 mm bits suit standard #8 hardware screws, while oversized bushings let the bit wander.

Specs

AdjustabilityFixed vs adjustable (64–160 mm)
CenteringSelf-centering fence vs single edge stop
MaterialAluminum/steel vs molded plastic
Bushing Size3/16 in (4.8 mm) / 5 mm

Related searches

What to check before buying

  • Confirm your door and drawer front thickness (typically 3/4 in or 18 mm) fits the template's clamping or fence opening.
  • Verify the template's edge stop can reach past any door overhang, lip, or applied molding on your cabinet fronts.
  • Match drill bushing diameter to your hardware screws: #8 screws need 3/16 in (4.8 mm) pilot holes in hardwood and 5 mm in softwood or MDF.
  • Check that the adjustable range covers every pull CTC in your order, and that the fence locks firmly without creep during drilling.

FAQ

All Woodworking Clamps, Jigs & Joinery buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.