DIY Tool Picks

Cabinet Hinge Template Buying Guide

A cabinet hinge template is a drilling jig that locates cup and screw holes for concealed Euro-style hinges with repeatable accuracy. The core trade-off is between stamped plastic or single-material guides and machined aluminum or steel templates with hardened bushings, which resist bit wander and wear. Choose a template with at least two hardened drill bushings and a frame that references the door edge and face, not a bare plastic plate.

Cup Diameter:35 mm standard (26/40 mm rare)Bushing Material:Hardened steel / bronze vs bare plasticScrew Pattern:Brand-specific (Blum 45/9.5, Grass 52/5.5)Edge Offset Range:3–6 mm adjustable stop

At a glance

Price range
Price range not synced yet
Category
Woodworking Clamps, Jigs & Joinery
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Cup diameter is standardized at 35 mm for Euro hinges; templates must accept a 35 mm Forstner bit and set cup depth to 11–13 mm.
  • Hardened steel or bronze bushings (not bare plastic holes) keep the 35 mm bit centered; unlined plastic ovalizes after a few dozen doors.
  • Edge-to-cup center distance is typically 3–6 mm; adjustable stops or index pins set this offset without measuring each door.
  • Two-piece или flip-style templates reference both the door edge and face; single-plate jigs rely on user alignment and drift on narrow stiles.

Best use cases

  • Pick a two-bushing aluminum template with adjustable edge stop for production runs of 5+ doors; skip it for a one-off repair where a plastic guide and calipers suffice.
  • Choose a template with screw-pattern inserts for your specific hinge brand (Blum, Grass, Salice) if drilling multiple brands; a generic cup-only jig leaves screw holes to freehand.
  • Select a self-centering or flip jig for face-frame cabinets and inset doors; frameless full-overlay doors accept simpler edge-referenced templates.
  • Skip dedicated templates entirely if you drill fewer than 3 doors per year; a 35 mm Forstner bit and shop-made MDF jig deliver equal accuracy at lower cost.

Buying tips

  • Verify the jig holds a 35 mm bit; 26 mm and 40 mm cups exist but are rare — a 35 mm-only template covers virtually all concealed hinges.
  • Match the template's screw-hole pattern to your hinge: Blum uses 45/9.5 mm, Grass 52/5.5 mm, and Salice 48/6 mm — universal inserts fit none perfectly.
  • Buy templates with steel or bronze bushings; plastic-only guides wear oval within 50–100 holes and cause cup misalignment.
  • For 35 mm bits, use a template with a depth stop or collar; cup depth 11–13 mm is critical — too deep punches through 16 mm doors.

Specs

Cup Diameter35 mm standard (26/40 mm rare)
Bushing MaterialHardened steel / bronze vs bare plastic
Screw PatternBrand-specific (Blum 45/9.5, Grass 52/5.5)
Edge Offset Range3–6 mm adjustable stop

Related searches

What to check before buying

  • Measure door thickness: standard 16–19 mm euro doors need 11–13 mm cup depth; thin 16 mm doors leave little margin for error.
  • Confirm hinge brand and screw pattern before buying; templates are pattern-specific and a mismatch requires a second jig.
  • Check your drill: a 35 mm Forstner bit with 8 mm shank fits most templates; 10 mm shanks need a compatible bushing.
  • Verify edge-to-cup offset range (typically 3–6 mm) matches your overlay and door gap requirements.

FAQ

All Woodworking Clamps, Jigs & Joinery buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.