Photos from current listings. Actual item, color, and included accessories may vary.
Dovetail Jig Buying Guide
A dovetail jig is a routing template system that guides a router to cut interlocking pin-and-tail joinery for drawers, boxes, and casework. The primary trade-off is between fixed-template jigs with limited spacing and adjustable comb-style jigs that set pin pitch precisely for custom layouts. Buy a comb-style jig with a metal template and clear router guide-bushing compatibility if you need repeatable, tight joinery; skip stamped-steel or all-plastic fixed-pitch fixtures that flex and limit you to one look.
At a glance
- Category
- Woodworking Clamps, Jigs & Joinery
- Data updated
- Nov 20, 2026
Current offers
NEW 24" Manual Dovetail Jig Woodworking Template Wood Board Dovetail Jig Machine$134.38View on eBay
Dovetail Jig, 12 In Width, Dove Tailing Router Jigs With 4 Bits & 3 Templates, Precise Alignment Tail Jig, Mortise And Tenon Woodworking Tools For Furniture & Wood Cabinet Making$210.99
View on Mallflare
NEW 24" Manual Dovetail Jig Woodworking Template Wood Board Dovetail Jig Machine$134.38View on eBay
NEW 24" Manual Dovetail Jig Woodworking Template Wood Board Dovetail Jig Machine$134.52View on eBay
Central Machinery 12" Dovetail Joint Fixture Woodworking Tool NEW$50.00View on eBay
Highlights
- Comb-style jigs with hardened steel or aluminum templates hold pin spacing to +/-0.005 in., while stamped 16-gauge steel flexes under router load and produces loose joints.
- Template width determines capacity: 12-inch jigs cut half-blind dovetails in drawer sides up to 12 inches wide; 24-inch jigs handle casework and blanket-chest panels in one pass.
- Router guide-bushing compatibility is fixed by template: most jigs require a 7/16-inch OD bushing with a 1/2-inch collet and 8-degree dovetail bit, so confirm your router's bushing set before buying.
- Through-dovetail capability requires a jig with a top-mounted template and variable pin pitch; half-blind-only jigs cut only stopped joints and cannot produce through or sliding dovetails.
Best use cases
- Drawer and box builder: pick a 12-inch comb-style half-blind jig with 3/4-inch pin pitch for repeatable drawer sides; skip 24-inch fixed-pitch fixtures that waste bench space.
- Casework and blanket chests: choose a 24-inch jig with at least 1-inch pin capacity to cut wide panels in one setup; a 12-inch jig forces two passes and risks misalignment.
- Through-dovetail furniture: buy a variable-pitch jig with top template access; half-blind-only fixtures cannot cut through tails and limit you to drawer joinery.
- Occasional DIY user: a fixed 12-inch aluminum template jig with two bits covers standard drawer boxes; skip multi-template kits whose plastic guides wear and lose accuracy.
Buying tips
- Match jig width to your widest panel: a 12-inch jig cuts boards up to 12 inches; for 16-inch drawer sides step up to a 24-inch model or plan two setups.
- Choose hardened steel or anodized aluminum templates over stamped steel: stamped 16-gauge flexes under router load and produces loose joints after repeated use.
- Confirm your router accepts a 7/16-inch OD guide bushing and 1/2-inch shank bits; jigs supplied with 1/4-inch shank bits limit you to light-duty routers and slower feed rates.
- For through dovetails, require variable pin spacing with at least 1/4-inch to 1-inch range; fixed-pitch half-blind jigs cannot cut through joints at all.
Specs
| Jig Type | Comb-style vs fixed-template half-blind |
|---|---|
| Template Width | 12 in vs 24 in capacity |
| Template Material | Hardened steel / anodized aluminum |
| Bushing & Bit | 7/16 in OD bushing, 8-degree bit |
Related searches
What to check before buying
- Measure your widest drawer side or panel; buy a jig whose template width equals or exceeds it to avoid two-pass setups.
- Verify your router's guide-bushing set includes a 7/16-inch OD bushing and that the collet accepts 1/2-inch shank dovetail bits.
- Check bench clearance: 24-inch jigs need at least 30 inches of front-to-back bench depth and a stable mounting surface.
- Confirm the jig includes or specifies the correct dovetail bit angle (usually 8 degrees) and that replacement bits are standard, not proprietary.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.