Jig Door Handle Buying Guide
A jig door handle is a template or drilling guide that locates and pilots screw holes for door handles, knobs, and levers at exact, repeatable backset and bore spacing. The core trade-off is between thin stamped plastic templates that flex and drift versus machined aluminum or steel guides that clamp rigidly and hold bushing-centered bits. The decision rule: buy a rigid metal jig with hardened drill bushings or self-centering mechanism if you drill more than a few doors; accept a plastic template only for a single door with a known standard backset.
At a glance
- Price range
- Price range not synced yet
- Category
- Woodworking Clamps, Jigs & Joinery
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Backset and bore standards: residential doors use 2-3/8 in (60 mm) or 2-3/4 in (70 mm) backsets with a 2-1/8 in (54 mm) cross-bore; jigs must index both, not just one.
- Drill bushings matter more than plate thickness: hardened steel bushings keep a 1 in or 2-1/8 in bit from walking; un-bushed plastic holes ovalize after a few doors.
- Self-centering and edge-clamping designs reference the door slab edge and face simultaneously, eliminating measurement error across 1-3/8 in and 1-3/4 in thick slabs.
- Lever and knob jigs differ: lever rosettes often need a 2-1/8 in bore plus through-bolt holes at 2-3/4 in or 3-3/4 in centers, while knob jigs may only pilot the spindle bore.
Best use cases
- Best fit: installing or matching multiple interior doors—choose a metal jig with interchangeable bushings for 2-3/8 in and 2-3/4 in backsets and clamp-on edge reference.
- Best fit: retrofitting lever handles on existing bored doors—pick a jig that references the existing 2-1/8 in cross-bore and pilots through-bolt holes, not a full-bore template.
- Wrong fit: one-off hollow-core or slab door with an unusual custom backset—skip universal jigs and make a shop-built template from the actual hardware's mounting plate.
- Wrong fit: drilling metal or fiberglass skinned doors—standard wood jigs lack the clamp pressure and carbide guidance; use a dedicated metal-door hole saw guide.
Buying tips
- Match the jig's bushing set to your bit: 2-1/8 in (54 mm) for standard locksets and deadbolts, 1 in (25 mm) for smaller tubular latches; a jig that only lists one size forces bushing purchases.
- Confirm clamp capacity covers your slab: most edge-clamping jigs open to 2-1/4 in (57 mm); thicker 2-1/4 in doors need extended-jaw models.
- Prefer jigs with hardened steel bushings and a positive stop collar; aluminum plates with bare holes wear oversize within dozens of bores.
- For lever handles, select a jig with rosette through-bolt spacing gauges (2-3/4 in or 3-3/4 in) rather than a knob-only spindle guide.
Specs
| Jig Material | Machined aluminum vs stamped plastic |
|---|---|
| Drill Guidance | Hardened steel bushings vs bare holes |
| Backset Settings | 2-3/8 in and 2-3/4 in adjustable |
| Door Thickness Fit | 1-3/8 in to 1-3/4 in clamp jaw |
Related searches
What to check before buying
- Measure your door thickness (1-3/8 in or 1-3/4 in) and confirm the jig's clamp jaw opens past it.
- Note existing backset (2-3/8 in or 2-3/4 in) and cross-bore diameter (typically 2-1/8 in) before choosing a template style.
- Check your drill bits: a 2-1/8 in hole saw or Forstner bit with a 1/4 in pilot shank is required for most bushing-guided jigs.
- Verify the jig references the door edge, not just the face, so it self-squares on beveled or pre-hung slabs.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
