DIY Tool Picks

Kitchen Cabinet Handle Template Buying Guide

A kitchen cabinet handle template is a drilling jig that guarantees consistent pull and knob placement across every door and drawer face, where the core trade-off is between thin stamped plastic guides that flex and wear versus machined metal or self-centering jigs that hold tolerances over hundreds of holes. The decision rule: buy a template that indexes off the cabinet edge with a hardened drill bushing and has a published hole-spacing range; skip any flex-prone guide with molded-in fixed spacing that cannot match your drawer and door pulls.

Template Material:Machined aluminum vs stamped plasticHole Spacing Range:Fixed vs adjustable 64-320 mmDrill Guide:Hardened bushing vs open holeDoor/Drawer Modes:Dual-mode vs door-edge only

At a glance

Price range
Price range not synced yet
Category
Woodworking Clamps, Jigs & Joinery
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Machined aluminum or hardened-steel bushing jigs hold hole position within ±0.5 mm across repeated use; stamped plastic templates flex under drill pressure and drift 1-2 mm over a full kitchen.
  • Dual-purpose templates cover both doors (edge-indexed vertical placement) and drawers (centered horizontal placement); single-mode door-only guides force manual centering on every drawer front.
  • Adjustable hole-spacing jigs with a 64-320 mm range cover standard 3-6.3 inch (76-160 mm) pull centers, while fixed-spacing templates lock you to one pull family.
  • Self-centering drill bits with spring-loaded V-points are the companion tool that keeps the bit perpendicular; a template without a drill guide bushing still allows bit wander on slick melamine.

Best use cases

  • Full kitchen refit with 20+ doors and drawers in matching 128 mm centers: pick an adjustable metal jig with door and drawer modes plus a self-centering bit; skip any single-spacing plastic template.
  • One-off replacement of a few cabinet pulls where existing holes dictate spacing: choose a compact edge-indexed template that references the door edge, not a full-kit adjustable jig.
  • Drawer-heavy kitchens with center-mounted knobs: select a T-square or centering template with a drawer-face stop; skip door-only handle jigs that cannot center on a drawer front.
  • Rental or temporary installs on laminate and thermofoil fronts: use a clamp-on template with protective pads and painter's tape under the fence; skip drill-through metal plates that scuff finished faces.

Buying tips

  • Match template hole spacing to your pull's center-to-center distance: standard pulls run 96, 128, 160, and 192 mm centers; a fixed template must equal your pull or it is useless.
  • Check the fence depth range: cabinet doors are typically 16-22 mm thick, and the template's edge stop must clamp securely across that range without rocking.
  • Choose a jig with replaceable drill bushings sized for your bit (commonly 4-5 mm for #8 screws); worn bushings are the main cause of elongated holes and loose handles.
  • For drawers, confirm the template offers a vertical centerline reference; door-edge indexing alone places drawer pulls off-center on standard 3/4-inch (19 mm) overlay drawer fronts.

Specs

Template MaterialMachined aluminum vs stamped plastic
Hole Spacing RangeFixed vs adjustable 64-320 mm
Drill GuideHardened bushing vs open hole
Door/Drawer ModesDual-mode vs door-edge only

Related searches

What to check before buying

  • Measure your pull's center-to-center hole distance and confirm the template supports that exact spacing or an adjustable range covering it.
  • Measure door and drawer front thickness (typically 16-22 mm) to ensure the template fence clamps flat without tipping.
  • Confirm your drill bit diameter matches the template bushing and your hardware screws (#8 screws commonly need a 4-5 mm bit).
  • Check that your cabinet front material (melamine, thermofoil, painted MDF, solid wood) is compatible with clamp pads and tape protection before drilling.

FAQ

All Woodworking Clamps, Jigs & Joinery buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.