Photos from current listings. Actual item, color, and included accessories may vary.
Mortising Attachment Buying Guide
A mortising attachment converts a standard drill press into a square-hole mortising machine by adding a hollow-chisel and bit set, a fence, and a hold-down. The core trade-off is drill-press compatibility and quill/chuck capacity versus the rigidity needed for clean, tear-out-free mortises. Buy only if your drill press has a 2-1/2-inch quill collar and enough spindle travel; otherwise choose a dedicated benchtop mortiser.
At a glance
- Category
- Woodworking Clamps, Jigs & Joinery
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Hollow-chisel sets use a four-sided chisel around a rotating bit; chisel shank diameters are typically 5/8-inch or 3/4-inch, so the drill-press quill collar must match.
- Most attachments include bushings sized to the chisel shank (commonly 5/8, 3/4, 1-inch) to center the chisel in the quill collar; missing bushings mean the set will not fit your press.
- Square-hole capacity is limited by drill-press spindle travel (typically 2-1/8 to 3-1/8 inches); deeper mortises require a dedicated mortiser with greater stroke.
- Chisel and bit quality determines edge life: high-speed steel (HSS) is standard, while coated or solid-carbide tips last longer in hardwoods and abrasive materials.
Best use cases
- Best fit: light-to-moderate mortising in softwoods and thin stock (under 2 inches deep) where you already own a drill press with a 2-1/2-inch quill collar and 1/2-inch chuck.
- Wrong fit: production furniture work or deep mortises over 2-1/2 inches—buy a dedicated benchtop mortiser with a rack-and-pinion head and longer stroke instead.
- Best fit: occasional square-hole joinery in a small shop where space and budget rule out a single-purpose machine; pick a set with at least four bushing sizes and a hold-down.
- Wrong fit: drill presses with a threaded chuck or non-standard quill collar—most attachments clamp to a smooth 2-1/2-inch collar and will not mount securely.
Buying tips
- Measure your drill press quill collar diameter before buying: most attachments fit a 2-1/2-inch collar; larger or smaller collars require adapter bushings or a different model.
- Check chuck capacity: a 1/2-inch chuck handles most mortising bits up to 1/2-inch shank; 5/8-inch chisel sets need a 5/8-inch chuck or a bushing-reduced shank.
- Choose a set with at least four chisel sizes (commonly 1/4, 5/16, 3/8, 1/2 inch) and matching bushings; sets missing common sizes force extra purchases.
- Prefer attachments with a cast-iron or steel fence and a hold-down rod; stamped-steel fences flex and cause wandering mortises.
Specs
| Chisel Shank | 5/8 in or 3/4 in |
|---|---|
| Quill Collar Fit | 2-1/2 in (most models) |
| Chuck Capacity | 1/2 in or 5/8 in |
| Chisel Sizes Included | 1/4, 5/16, 3/8, 1/2 in |
Related searches
What to check before buying
- Quill collar: measure the outside diameter of the drill-press quill collar; it must match the attachment clamp (typically 2-1/2 inches).
- Spindle travel: confirm your drill press has at least 2-1/8 inches of spindle travel for through-mortises in 1-1/2-inch stock.
- Chuck size: verify a 1/2-inch or 5/8-inch chuck to accept the mortising bit shank without adapters.
- Table and fence: ensure the drill-press table has a slot or T-track to mount the attachment fence and hold-down securely.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.

