DIY Tool Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Router Template Buying Guide

Router templates are guided patterns—fixed acrylic or MDF shapes, adjustable sleds, or bit-and-comb jigs—that constrain a router to cut repeatable joinery, curves, or flattening passes. The core trade-off is template rigidity and guide-bushing compatibility versus setup adjustability: fixed templates deliver repeatability but only for one geometry, while adjustable jigs trade some rigidity for range. Buy fixed templates when you need identical repeated cuts; buy adjustable sleds or comb jigs when you need variable dimensions across projects.

Template Material:Acrylic 1/4-3/8 in / MDF / AluminumGuide Bushing:5/8 in OD standard; adapter for trimSled Rail Length:48-60 in twin-rail adjustableDovetail Jig Width:7-14 in comb; 8-14° bits
Typical price range$34.99 – $210.99

At a glance

Category
Woodworking Clamps, Jigs & Joinery
Data updated
Nov 20, 2026

Current offers

Highlights

  • Fixed templates are typically 1/4 in (6.35 mm) or 3/8 in (9.5 mm) clear acrylic or MDF; acrylic resists bit strikes and humidity swell, MDF is cheaper but wears at the guide edge.
  • Template routing requires a guide bushing matched to bit diameter—common sets use 5/8 in OD bushings with 1/4 in or 1/2 in shank bits; the bushing-to-bit offset determines the final cut size.
  • Adjustable slab-flattening sleds run 48–60 in rails on twin linear bearings or roller guides; rail straightness and carriage slop, not sled length, set flattening accuracy.
  • Dovetail comb jigs use 7–14 in widths with interchangeable 8–14 degree dovetail bits; bit angle and template pitch must match the wood thickness and pin spacing you want.

Best use cases

  • Pick a fixed acrylic body template (e.g., Telecaster-style guitar outline) when cutting the same shape repeatedly; skip it if your project dimensions vary between builds.
  • Choose a 48–60 in adjustable router sled for flattening wide slabs and end-grain cutting boards; skip sleds for small joinery—they add setup time without benefit.
  • Use a dovetail comb jig with matched bits and templates for drawer and cabinet boxes at 12 in widths; skip it for single through-dovetails where a handheld marking gauge is faster.
  • For one-off curved profiles, make a shop-built MDF template rather than buying a fixed pattern; buy commercial templates only when the geometry is complex or must be exact.

Buying tips

  • Match guide-bushing OD to template opening: a 5/8 in bushing with a 1/2 in bit gives a 1/16 in offset per side—size template openings to final cut plus twice the offset.
  • For slot-and-key templates, verify the template's integral guide ring fits your router base sub-base; most accept standard 5/8 in bushings, but trim routers often need an adapter.
  • Choose 3/8 in acrylic templates over 1/4 in for high-use production; the thicker edge resists bit chatter and stays true after repeated bushing passes.
  • On adjustable sleds, prioritize twin-rail carriage support and locking height adjustment; single-rail or cam-lock designs drift under a 2+ HP router's torque.

Specs

Template MaterialAcrylic 1/4-3/8 in / MDF / Aluminum
Guide Bushing5/8 in OD standard; adapter for trim
Sled Rail Length48-60 in twin-rail adjustable
Dovetail Jig Width7-14 in comb; 8-14° bits

Related searches

What to check before buying

  • Measure your router base diameter and confirm the template or bushing set matches—most fixed templates assume a 5/8 in guide bushing and a standard round sub-base.
  • For sleds, confirm bench and infeed/outfeed space equals sled length plus slab length; a 60 in sled needs roughly 10 ft of clear run.
  • Check bit shank diameter (1/4 in vs 1/2 in) against your router collet and the template's recommended bit; dovetail jigs specify both bit angle and shank.
  • Verify template thickness clears your bit's cutting length and bushing depth—thin 1/4 in templates limit plunge depth on thick stock.

FAQ

All Woodworking Clamps, Jigs & Joinery buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.