DIY Tool Picks

Tub Filler Buying Guide

A tub filler is the dedicated faucet that fills a freestanding or drop-in bathtub, and the primary trade-off is floor-mounted or deck-mounted construction versus the tub's rim and plumbing rough-in. Durable options use solid brass bodies with ceramic cartridges and specified flow rates at 60 psi; compromises use thin zinc alloy or plated plastic and fail at the rough-in or finish layer.

Mount Type:Floor / Deck / Wall mountedBody Material:Lead-free brass vs zinc alloyFlow Rate:6-8 gpm at 60 psiValve Type:Ceramic disc vs compression

At a glance

Price range
Price range not synced yet
Category
Home Repair
Data updated
Nov 20, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Freestanding tubs need a floor-mounted filler with a rough-in floor flange and adjustable riser; drop-in or alcove tubs use a deck-mounted 2- or 3-hole filler matched to the rim drill.
  • Solid brass (usually C36000 or lead-free DZR brass) outlasts zinc-alloy bodies; ceramic-disc cartridges rated for 500,000+ cycles beat rubber washer valves for drips and handle feel.
  • Freestanding fillers commonly flow 6-8 gpm at 60 psi and require 1/2-inch NPT supply lines; hand-shower models add a diverter and need hot/cold rough-in within about 12 inches of the floor.
  • Finish tiers matter: PVD or physical-vapor-deposition finishes and thick electroplated chrome resist pitting; thin decorative finishes over zinc-alloy bases flake at the spout and base.

Best use cases

  • Choose a floor-mounted freestanding filler with a matching rough-in flange when the tub is a freestanding soak tub set away from the wall; skip deck-mounted models because the rim cannot carry the valve body.
  • Pick a deck-mounted 3-hole filler with a hand-shower diverter for alcove or drop-in tubs with a wide rim and existing wall plumbing; skip floor-mounted risers that require slab or subfloor access.
  • For a clawfoot or slipper tub, use a floor-mounted filler with a 2- to 3-inch adjustable riser and a tub-tray or floor flange; skip wall-mounted fillers unless the wall framing already has blocking at the correct height.
  • Choose a wall-mounted filler with a 6- to 8-inch spout reach for narrow rimless tubs where deck space is absent; skip it if the wall is tile-over-backerboard without a rough-in valve access panel.

Buying tips

  • Match filler holes to the tub rim: 3-hole deck fillers need a 1-3/8-inch center hole and 1-inch side holes; measure rim width for at least 2-3/4 inches of flat deck before ordering.
  • Confirm supply rough-in: freestanding floor fillers need hot and cold 1/2-inch NPT stubs within about 12 inches of the floor and a centered rough-in; wall fillers need a 1/2-inch NPT valve rough-in at 32-36 inches above the floor.
  • Require lead-free brass (NSF/ANSI 61) and ceramic cartridges; avoid zinc-alloy bodies with thin plating, which pit and flake within a few years in wet bath environments.
  • For freestanding tubs, choose an adjustable riser range that covers your tub rim height plus 6-10 inches; a fixed riser that is too short will not clear the rim and too tall looks unbalanced.

Specs

Mount TypeFloor / Deck / Wall mounted
Body MaterialLead-free brass vs zinc alloy
Flow Rate6-8 gpm at 60 psi
Valve TypeCeramic disc vs compression

Related searches

What to check before buying

  • Measure the tub rim drill: hole count, center-to-center spacing, and maximum rim thickness; freestanding fillers do not need deck holes but do need a centered floor rough-in.
  • Check the floor or wall rough-in: supply stub locations, 1/2-inch NPT thread standard, and whether a slab or finished floor can be opened for the floor flange and riser.
  • Verify water pressure and flow: 6-8 gpm at 60 psi is typical; low-pressure homes under 40 psi need a filler with a wider valve orifice or a booster.
  • Confirm finish and material compatibility with the bath: PVD or thick chrome over brass for humid rooms; avoid thin plated zinc in shower-spray zones.

FAQ

All Home Repair buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.