Photos from current listings. Actual item, color, and included accessories may vary.
Wood Router Buying Guide
A wood router is a motorized cutting tool that spins a bit at high speed to trim, edge, groove, and profile wood, available in palm/trim, fixed-base, and plunge-base configurations. The core trade-off is motor wattage and collet size versus control and portability: trim routers at 1–1.25 HP with 1/4-inch collets suit light edge work, while 2+ HP routers with 1/2-inch collets handle raised panels and deep mortises. The decision rule: buy the largest collet and wattage your typical cut demands, but only if the base design gives you safe, repeatable depth control.
At a glance
- Category
- Wood Routers & Carving Tools
- Data updated
- Nov 20, 2026
Current offers
800W Compact Wood Router Tool for Woodworking, Electric Hand Trimmer Set$35.99View on eBay
Wood Router, 1 H P 710W, Variable Speed Palm Tool With Soft Start, Compact Edge Trimmer Fixed Base & 1 4-Inch Collet, Dust Hood, For Woodworking, Trimming, DIY Projects, Corded$66.99
View on Mallflare
Wood Router, 6.5Amp 1.25HP Wood Routers for Woodworking, 800W Hand Wood$42.99View on eBay
Cordless Wood Router, 18V Brushless, Compact Variable Speed Palm With Fixed Base, 1 4-Inch Collet, Edge Trimmer Tool For Woodworking, Compatible M Akita 18V Batteries No Battery$83.99
View on Mallflare
Router Lift System Aluminum Insert Plate 800W 6-Speed Wood Router Trimmer Tool$281.54New · Last checked Nov 16, 2026View on eBay
1pc Wood Router 1050w Wood Trimmer Electric Carving Tool 220v$285.19New · Last checked Nov 16, 2026View on eBay
1600W Electric Wood Milling Engraving Machine Woodworking Trimming Wood Router-$309.29New · Last checked Nov 16, 2026View on eBay
Jesada Tools 600-562 Ogee Kitchen Set Router Bits 1/2" Shank 5 Pc Set & Wood Box$200.00Open box · Last checked Nov 16, 2026View on eBay
Highlights
- Collet size dictates bit compatibility and cut stability: 1/4-inch collets are standard on palm and trim routers, while 1/2-inch collets are found on mid-to-full-size fixed and plunge routers for larger bits and deeper cuts.
- Motor power tiers are 1–1.25 HP (710–800W) for trim and palm routers, 1.75–2.25 HP for mid-size fixed-base routers, and 3+ HP for production plunge routers; higher wattage maintains RPM under load.
- Variable speed (typically 8,000–24,000 RPM) lets you match RPM to bit diameter and material—large-diameter bits need lower RPM, small bits need higher RPM to avoid burning.
- Base type determines operation: fixed base is best for edge trimming and repetitive cuts, plunge base is required for interior mortises and stopped grooves, and combo kits include both bases.
Best use cases
- Best fit for beginner and light DIY: a 1–1.25 HP palm/trim router with 1/4-inch collet and fixed base for edge rounding, flush trimming, and small grooves; skip 1/2-inch collet routers until you regularly cut raised panels.
- Best fit for furniture and cabinet work: a 1.75–2.25 HP fixed-base router with 1/2-inch collet for dados, rabbets, and raised panel bits; skip compact trim routers for large-diameter bits that demand low RPM and high torque.
- Best fit for interior joinery and stopped cuts: a plunge-base router (or combo kit) lets you set exact depth and plunge into the workpiece; a fixed-base-only router cannot safely start a cut in the middle of a board.
- Wrong fit: a cordless 18V palm router is convenient for quick trim jobs but lacks the sustained power for continuous 1/2-inch bit work; choose corded for heavy or prolonged routing.
Buying tips
- Match collet to bit shank: 1/4-inch bits are common and cheaper, but 1/2-inch shanks reduce vibration and are mandatory for panel-raising and large-diameter bits above roughly 1 inch.
- Choose wattage by cut depth and wood hardness: 710–800W handles softwoods and shallow passes; 1,400W+ (1.75 HP+) is needed for hardwoods and deep mortises without bogging.
- Check base opening and sub-base compatibility: standard 1-3/4-inch (44mm) or 3-1/2-inch (89mm) base openings accept common guide bushings; confirm your planned bushings and template guides fit the sub-base.
- Cordless routers are platform-locked: an 18V brushless palm router that is compatible with Makita 18V batteries only works if you already own that battery platform; otherwise buy corded or a kit with batteries.
Specs
| Motor Power | 1–3.25 HP (710W–2,400W) |
|---|---|
| Collet Size | 1/4-inch vs 1/2-inch |
| Base Type | Fixed, Plunge, or Combo |
| Power Source | Corded AC vs 18V Cordless |
Related searches
What to check before buying
- Measure your workpiece and intended cut: if you need interior mortises or stopped grooves, you need a plunge base; a fixed base alone cannot plunge.
- Verify bit shank diameter against the collet: 1/4-inch and 1/2-inch collets are not interchangeable without a collet change, and 8mm collets exist on some imported models.
- Confirm power supply: corded routers need a nearby outlet and draw 6–15 amps; cordless routers require a specific battery platform and charger you already own.
- Check base diameter and bushing compatibility: standard guide bushings require a matching sub-base or adapter, and template guides vary by brand and base size.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.