Router Bowl Template Buying Guide
A router bowl template is a reusable jig or guide that constrains a plunge router to cut circular or elliptical recesses for bowls, trays, and charcuterie boards. The core trade-off is between fixed-radius steel/acrylic rings (repeatable for one diameter) and adjustable trammel or ellipse jigs (variable radius but require careful setup). Buy a rigid template sized to your router's base and intended bowl diameter; skip flexible or thin plastic guides that deflect under cutting load.
At a glance
- Price range
- Price range not synced yet
- Category
- Wood Routers & Carving Tools
- Data updated
- Nov 20, 2026
Current offers
Highlights
- Fixed ring templates are sized by inner/outer diameter and match router base bushings; a 1-3/4 in ID ring cuts a 3-1/2 in bowl with a 1/2 in straight bit.
- Adjustable trammel jigs pivot around a center pin; radial arm length must reach the bowl radius plus bit diameter, typically 6-18 in range.
- Acrylic templates need 1/4 in minimum thickness and laser-cut edges; thinner sheets flex and cause chatter at 1/4 in depth of cut.
- Ellipse jigs use two sliding dovetail tracks; the distance between pivot points sets major/minor axis independently, unlike fixed circles.
Best use cases
- Best fit: fixed-ring template set if you batch-produce identical 8-12 in serving bowls on a router table—pick one ring per diameter and skip adjustable jigs.
- Best fit: trammel or circle jig for one-off charcuterie boards from 6-24 in diameter—choose a metal pivot pin and lockable arm, not a plastic protractor.
- Wrong fit: thin acrylic craft templates under 1/4 in for hardwood bowls—deflection ruins depth consistency; use 3/8 in phenolic or aluminum instead.
- Wrong fit: fixed ring templates for oval platters or offset handles—ellipse jigs with dual pivot tracks are required; circles cannot produce ellipses.
Buying tips
- Match template ID to bushing OD: a 30 mm guide bushing needs a 30 mm template opening; offset equals (bushing OD minus bit diameter) divided by 2.
- For 1/2 in shank bits, template material must be at least 3/8 in thick and edge-supported; 1/4 in shank bits allow 1/4 in acrylic with light passes.
- Depth per pass: never exceed 1/8 in in hardwood with a 1/2 in bit; fixed templates need clearance for chips—choose open-center rings, not closed discs.
- Adjustable jigs must lock both radius and pivot height; a 1/16 in radius drift over 6000 rpm produces visible step marks on bowl walls.
Specs
| Template Type | Fixed ring / adjustable trammel / ellipse |
|---|---|
| Material Grade | 1/4-3/8 in acrylic / phenolic / aluminum |
| Bushing Fit | 30 mm / 1 in OD guide bushing |
| Diameter Range | 6-24 in circles; ovals variable |
Related searches
What to check before buying
- Measure router base diameter and bushing OD; template opening must accept the bushing with zero slop and clear the bit.
- Confirm bowl blank thickness plus desired depth fits under the plunge router's maximum travel; add 1 in for template and bushing stack.
- Check template outer diameter clears your router table fence or workpiece clamps for the full 360-degree rotation.
- Verify pivot pin diameter matches the center hole in your blank or sacrificial base; 1/4 in and 5/16 in are common—buy the matching collar.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 20, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
